xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
324
DGS-3627:5#
show pim
Command: show pim
PIM Global State : Enabled
Last Hop SPT Switchover : Immediately
Register Probe Time : 5
Register Suppression Time : 60
PIM Interface Table
Designated Hello J/P
Interface IP Address Router Interval Interval Mode State
------------------ --------------------- ----------------- ----------- ----------- ------- ---------
Zira 11.1.1.1/8 10.53.13.30 30 60 DM Disabled
System 10.53.13.30/8 11.1.1.1 60 60 SM Enabled
Total Entries: 2
DGS-3627:5#
show pim neighbor
Purpose
Used to display PIM neighbors of the Switch.
Syntax
show pim neighbor {ipif <ipif_name12> | ipaddress
<network_address>}
Description
This command will display the PIM neighbor table for the Switch.
Parameters
<ipif_name 12> -
Enter the name of the IP interface for which to display
PIM information regarding PIM neighbors.
ipaddress <network_address>
- Enter the IP address of a PIM neighbor
for which to display information.
Adding no parameters to this command will display all PIM neighbors
that probed the Switch.
Restrictions None.
Usage example:
To view the PIM neighbors:
DGS-3627:5#
show pim neighbor
Command: show pim neighbor
PIM Neighbor Address Table
Interface Name Neighbor Address Expired Time
--------------------- --------------------- ------------
n10 10.20.6.251 79
Total Entries: 1
DGS-3627:5#
