xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
215
config 802.1x capability ports
Description The
config 802.1x
command has four capabilities that can be set for
each port. Authenticator, Supplicant, Authenticator and Supplicant,
and None.
Parameters
<portlist>
−
Specifies a port or range of ports to be configured. The
beginning and end of the port list range are separated by a dash.
Non-contiguous portlist entries are separated by a comma. (ex: 1-3,7-
9)
all
−
Specifies all of the ports on the Switch.
authenticator
−
A user must pass the authentication process to gain
access to the network.
none
−
The port is not controlled by the 802.1x functions.
Restrictions Only
administrator-level
and operator-level users can issue this
command.
Example usage:
To configure 802.1x capability on ports 1-10:
DGS-3627:5#config 802.1x capability ports 1 – 10 authenticator
Command: config 802.1x capability ports 1 – 10 authenticator
Success.
DGS-3627:5#
config 802.1x auth_parameter
Purpose
Used to configure the 802.1x authentication parameters on a range of
ports. The default parameter will return all ports in the specified range to
their default 802.1x settings.
Syntax
config 802.1x auth_parameter ports [<portlist> | all] [default |
{direction [both | in] | port_control [force_unauth | auto | force_auth] |
quiet_period <sec 0-65535> | tx_period <sec 1-65535> | supp_timeout
<sec 1-65535> | server_timeout <sec 1-65535> | max_req <value 1-10>
| reauth_period <sec 1-65535> | enable_reauth [enable | disable]}]
Description
The
config 802.1x auth_parameter
command is used to configure the
802.1x Authentication parameters on a range of ports. The default
parameter will return all ports in the specified range to their default 802.1x
settings.
Parameters
<portlist>
−
Specifies a port or range of ports to be configured. The
beginning and end of the port list range are separated by a dash. Non-
contiguous portlist entries are separated by a comma. (ex: 1-3,7-9)
all
−
Specifies all of the ports on the Switch.
default
−
Returns all of the ports in the specified range to their 802.1x
default settings.
direction [both | in]
−
Determines whether a controlled port blocks
communication in both the receiving and transmitting directions, or just the
receiving direction.
port_control
−
Configures the administrative control over the authentication
process for the range of ports. The user has the following authentication
options:
•
force_auth
−
Forces the Authenticator for the port to become
authorized. Network access is allowed.
