xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
64
show boot_file
Purpose
Used to show the currently set boot files located on the Switch.
Syntax
show boot_file {[unit <unitid 1-12> | all]}
Description
This command is used to display the name and path of the firmware
image and configuration file that have been previously set up by the
user, as the boot up files.
Parameters
unit <unit_id 1-12>
- Select the switch in the switch stack where the
boot file is located, denoted by unit ID number.
all
– Enter this parameter to display the boot files on all switches in
the switch stack.
Restrictions None.
Example usage:
To rename a file:
DGS-3627:5#show boot_file
Command: show boot_file
------------------------------------------------------------------------------------------
Unit ID : 1
Boot up firmware image : C:\RUN.HAD
Boot up configuration file: C:\STARTUP.CFG
------------------------------------------------------------------------------------------
DGS-3627:5#
show storage_media_info
Purpose
Used to view flash memory information on the Switch.
Syntax
show storage_media_info {[unit <unitid 1-12> | all]}
Description
This command will display information regarding the internal flash
memory of the Switch. This command will display the following
information:
Drive: The name of the drive of the storage media accessory.
Media_Type: Description of the type of storage media accessory
currently in use.
Size: Description of the size of memory space available on the
storage media accessory.
Label: Description assigned to this storage media accessory.
FS_Type: Description of the type of format of this storage media
accessory.
Parameters
unit <unit_id 1-12>
- Select the switch in the switch stack where the
storage media information is located, denoted by unit ID number.
all
– Enter this parameter to display the storage media information
on all switches in the switch stack.
Restrictions None.
