xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
419
DGS-3627:5#config sim_group delete 1
Command: config sim_group delete 1
Please wait for ACK!!!
SIM Config Success!!!
Success.
DGS-3627:5#
config sim
Purpose
Used to configure role parameters for the SIM protocol on the Switch.
Syntax
config sim [[commander {group_name <groupname 64>} |
candidate] | dp_interval <sec 30-90> | hold_time <sec 100-255>]}
Description
This command is used to configure parameters of switches of the SIM.
Parameters
commander
– Use this parameter to configure the commander switch(CS)
for the following parameters:
group_name <groupname 64>
- Used to update the name of the
group. Enter an alphanumeric string of up to 64 characters to
rename the SIM group.
dp_interval <30-90>
– The user may set the discovery protocol
interval, in seconds that the Switch will send out discovery
packets. Returning information to the CS will include information
about other switches connected to it. (Ex. MS, CaS). The user
may set the
dp_interval
from
30
to
90
seconds.
hold time <sec 100-255>
– Using this parameter, the user may
set the time, in seconds, the CS will hold information sent to it
from other switches, utilizing the discovery interval protocol. The
user may set the hold time from
100
to
255
seconds.
candidate
– Used to change the role of a CS (commander) to a CaS
(candidate).
dp_interval
<30-90>
– The user may set the discovery protocol
interval, in seconds that the Switch will send out discovery
packets. Returning information to the CS will include information
about other switches connected to it. (Ex. MS, CaS). The user
may set the
dp_interval
from
30
to
90
seconds.
hold time <100-255>
– Using this parameter, the user may set
the time, in seconds, the Switch will hold information sent to it
from other switches, utilizing the discovery interval protocol. The
user may set the hold time from
100
to
255
seconds.
Restrictions Only
administrator-level users can issue this command.
To change the time interval of the discovery protocol:
DGS-3627:5# config sim commander dp_interval 40
Command: config sim commander dp_interval 40
Success.
DGS-3627:5#
To change the hold time of the discovery protocol:
