xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
165
23
IGMP
S
NOOPING
C
OMMANDS
The IGMP Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config igmp_snooping
[vlan <vlan_name 32> | all] {host_timeout <sec 1-16711450> |
router_timeout <sec 1-16711450> | leave_timer <sec 1-
16711450> | state [enable | disable] | fast_leave [enable |
disable]}
config igmp_snooping querier
[vlan <vlan_name 32> | all] {query_interval <sec 1-65535> |
max_response_time <sec 1-25> | robustness_variable <value 1-
255> | last_member_query_interval <sec 1-25> | state [enable |
disable]}
config router_ports
<vlan_name 32> [add | delete] <portlist>
config router_ports_forbidden
<vlan_name 32> [add | delete] <portlist>
enable igmp_snooping
{forward_mcrouter_only}
show igmp_snooping
{vlan <vlan_name 32>}
disable igmp_snooping
{forward_mcrouter_only}
show igmp snooping group
{vlan <vlan_name 32>}
show router_ports
{vlan <vlan_name 32>} {[static | dynamic| forbidden]}
show igmp_snooping forwarding
{vlan <vlan_name 32>}
create igmp_snooping multicast_vlan
<vlan_name 32> <vlanid 2-4094>
config igmp_snooping multicast_vlan
<vlan_name 32> {member_port <portlist> | source_port <portlist>
| state [enable | disable] | replace_source_ip <ipaddr>
delete igmp_snooping multicast_vlan
<vlan_name 32>
show igmp_snooping multicast_vlan
{<vlan_name 32>}
config igmp_snooping multicast_vlan_group
<vlan_name 32> [add multicast_range <range_name 32> | delete
multicast_range [<range_name 32> | all]]
show igmp_snooping multicast_vlan_group
{<vlan_name 32>}
Each command is listed, in detail, in the following sections.
config igmp_snooping
Purpose
Used to configure IGMP snooping on the Switch.
Syntax
config igmp_snooping [vlan <vlan_name 32> | all] {host_timeout <sec 1-
16711450> | router_timeout <sec 1-16711450> | leave_timer <sec 1-
16711450> | state [enable | disable]} | fast_leave [enable | disable]}
Description
This command allows users to configure IGMP snooping on the Switch.
Parameters
vlan <vlan_name 32>
−
The name of the VLAN for which IGMP snooping is to
be configured.
host_timeout <sec 1-16711450>
−
Specifies the maximum amount of time a
host can be a member of a multicast group without the Switch receiving a host
membership report. The default is
260
seconds.
router_timeout <sec 1-16711450>
−
Specifies the maximum amount of time a
route can be a member of a multicast group without the Switch receiving a
