xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
258
delete sflow counter_poller ports
Parameters
<portlist>
- Use this parameter to delete the ports that will be mined
for sFlow information.
all
– Use this parameter to delete all ports to be mined for sFlow
information.
Restrictions Only
administrator-level
and operator-level users can issue this
command.
Example usage:
To delete the sFlow counter poller settings:
DGS-3627:5#delete sflow counter_poller ports all
Command:delete sflow counter_poller ports all
Success.
DGS-3627:5#
show sflow counter_poller
Purpose
Used to display the counter poller for the sFlow function of the
switch.
Syntax
show sflow counter_poller
Description
This command will allow the user to display the Switch’s counter
poller.
Parameters None.
Restrictions Only
administrator-level
and operator-level users can issue this
command.
Example usage:
To show the sFlow counter poller settings:
DGS-3627:5#show sflow counter_poller
Command:show sflow counter_poller
Port Analyzer Server ID Polling Interval
-------- ------------------------- -----------------------
1 1 20
Total Entries : 1
DGS-3627:5#
create sflow flow_sampler ports
Purpose
Used to configure the flow sampler settings for the sFlow function.
Syntax
create sflow flow_sampler ports [<portlist> | all]
analyzer_server_id <value 1-4> {rate <value 0-65535> |
maxheadersize <value 18-256>
Description
This command will allow users to configure the Switch’s settings for
taking sample packets from the network, including the sampling rate
and the amount of the packet header to be extracted.
