xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
219
config radius
Purpose
Used to configure the Switch’s RADIUS settings.
Syntax
config radius <server_index 1-3> {ipaddress <server_ip> | key
<passwd 32> | auth_port <udp_port_number 1-65535> |
acct_port <udp_port_number 1-65535>}
Description The
config radius
command is used to configure the Switch’s
RADIUS settings.
Parameters
<server_index 1-3>
−
Assigns a number to the current set of
RADIUS server settings. Up to three groups of RADIUS server
settings can be entered on the Switch.
ipaddress <server_ip>
−
The IP address of the RADIUS server.
key
−
Specifies that a password and encryption key will be used
between the Switch and the RADIUS server.
•
<passwd 32>
−
The shared-secret key used by the
RADIUS server and the Switch. Up to 32 characters can
be used.
auth_port <udp_port_number 1-65535>
−
The UDP port number for
authentication requests. The default is
1812
.
acct_port <udp_port_number 1-65535>
−
The UDP port number for
accounting requests. The default is
1813
.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure the RADIUS settings:
DGS-3627:5#config radius 1 ipaddress 10.48.74.121 key dlink default
Command: config radius 1 ipaddress 10.48.74.121 key dlink default
Success.
DGS-3627:5#
show radius
Purpose
Used to display the current RADIUS configurations on the Switch.
Syntax
show radius
Description The
show radius
command is used to display the current RADIUS
configurations on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display RADIUS settings on the Switch:
