D-Link xStack DGS-3600 Series, Cli Manual

Page: 370 / 431

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config authen_login
administrator level, the user must implement the enable admin command,
followed by a previously configured password. ( See the enable admin
part of this section for more detailed information, concerning the enable
admin command.)
Parameters default – The default method list for access authentication, as defined by
the user. The user may choose one or a combination of up to four of the
following authentication methods:
ƒ
tacacs – Adding this parameter will require the user to be
authenticated using the TACACS protocol from the remote
TACACS server hosts of the TACACS server group list.
ƒ
xtacacs – Adding this parameter will require the user to be
authenticated using the XTACACS protocol from the remote
XTACACS server hosts of the XTACACS server group list.
ƒ
– Adding this parameter will require the user to be
authenticated using the protocol from the remote
server hosts of the server group list.
ƒ
radius - Adding this parameter will require the user to be
authenticated using the RADIUS protocol from the remote
RADIUS server hosts of the RADIUS server group list.
ƒ
server_group <string 15> - Adding this parameter will require
the user to be authenticated using a user-defined server group
previously configured on the Switch.
ƒ
local - Adding this parameter will require the user to be
authenticated using the local user account database on the
Switch.
ƒ
none – Adding this parameter will require no authentication to
access the Switch.
method_list_name – Enter a previously implemented method list name
defined by the user. The user may add one, or a combination of up to
four of the following authentication methods to this method list:
ƒ
tacacs – Adding this parameter will require the user to be
authenticated using the TACACS protocol from a remote
TACACS server.
ƒ
xtacacs – Adding this parameter will require the user to be
authenticated using the XTACACS protocol from a remote
XTACACS server.
ƒ
– Adding this parameter will require the user to be
authenticated using the protocol from a remote
server.
ƒ
radius - Adding this parameter will require the user to be
authenticated using the RADIUS protocol from a remote
RADIUS server.
ƒ
server_group <string 15> - Adding this parameter will require
the user to be authenticated using a user-defined server group
previously configured on the Switch.
ƒ
local - Adding this parameter will require the user to be
authenticated using the local user account database on the
Switch.
ƒ
none – Adding this parameter will require no authentication to
access the Switch.
NOTE:
Entering none or local as an authentication
protocol will override any other authentication that
follows it on a method list or on the default method list.
Restrictions Only administrator-level users can issue this command.
367