xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
282
disable gratuitous_arp trap & log
Purpose
Used to disable gratuitous ARP trap and log state.
Syntax
disable gratuitous_arp {ipif <ipif_name 12>} {trap |log }
Description
This command is used to disable gratuitous ARP trap and log state.
When the trap and log are disabled, the switch won’t trap and log IP
conflict events to inform the administrator.
Parameters
ipif <ipif_name 12>
−
The name of the IP interface the end node or
station for which the ARP table entry was made, resides on.
{trap|log}
−
Select gratuitous ARP trap and/or log state.
Restrictions Only
administrator-level
and operator-level users can issue this
command.
Example Usage:
To disable the system interface’s gratuitous ARP log and trap:
DGS-3627:5#disable gratuitous_arp System trap log
Command: disable gratuitous_arp System trap log
Success.
DGS-3627:5#
config gratuitous_arp send periodically
Purpose
Used to configure the interval for periodical sending of gratuitous
ARP request packet.
Syntax
config gratuitous_arp send periodically ipif <ipif_name 12>
interval <value 0-65535>
Description
The command is used to configure the interval for the periodic
sending of gratuitous ARP request packets. By default, the interval
is 0.
Parameters
<ipif_name 12>
−
The name of the Layer 3 interface.
<value 0-65535>
−
Periodically send gratuitous ARP interval
time in seconds
.
0 - means not to send gratuitous ARP
periodically.
Restrictions Only
administrator-level
and operator-level users can issue this
command.
Example usage:
To configure gratuitous ARP interval to 5 for IPIF System:
DGS-3627:5#config gratuitous_arp send periodically ipif
System interval 5
Command: config gratuitous_arp send periodically ipif System
interval 5
Success.
DGS-3627:5#
