xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
410
show lldp local_ports
Purpose
Used to display the per-port information currently available for
populating outbound LLDP advertisements.
Syntax
show lldp local_ports {<portlist>} {mode [brief | normal |
detailed]}
Description
This command displays the per-port information currently available for
populating outbound LLDP advertisements.
Parameters
<portlist>-
Use this parameter to define ports to be configured.
brief
– Display the information in brief mode.
normal
– Display the information in normal mode. This is the default
display mode.
detailed
– Display the information in detailed mode.
Restrictions None.
Usage Example:
To display outbound LLDP advertisements for port 1:
DGS-3627:5#show lldp local_ports 1
Command: show lldp local_ports 1
Port ID : 1
--------------------------------------------------------------------------------------------------------
Port ID Subtype : Local
Port ID : 1/1
Port Description : RMON Port 1 on Unit 1
Port PVID : 1
Management Address Count : 1
PPVID Entries Count : 0
VLAN Name Entries Count : 1
Protocol Identity Entries Count : 0
MAC/PHY Configuration/Status : (See Detail)
Link Aggregation : (See Detail)
Maximum Frame Size : 1536
Port ID : 2
---------------------------------------------------------------------------------------------------------
Port ID Subtype : Local
Port ID : 1/1
Port Description : RMON Port 1 on Unit 1
Port PVID : 1
Management Address Count : 1
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
ENTER
Next Entry
a
All
