xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
217
config 802.1x init
command.
Example usage:
To initialize the authentication state machine of all ports:
DGS-3627:5# config 802.1x init port_based ports all
Command: config 802.1x init port_based ports all
Success.
DGS-3627:5#
config 802.1x reauth
Purpose
Used to configure the 802.1x re-authentication feature of the Switch.
Syntax
config 802.1x reauth {port_based ports [<portlist> | all] |
mac_based [ports] [<portlist> | all] {mac_address <macaddr>}]
Description The
config 802.1x reauth
command is used to re-authenticate a
previously authenticated device based on port number or MAC address.
Parameters
port_based
– This instructs the Switch to re-authorize 802.1x functions
based only on the port number. Ports approved for re-authorization can
then be specified.
mac_based
−
This instructs the Switch to re-authorize 802.1x functions
based only on the MAC address. MAC addresses approved for re-
authorization can then be specified.
ports <portlist>
−
Specifies a port or range of ports to be re-authorized.
The beginning and end of the port list range are separated by a dash.
Non-contiguous portlist entries are separated by a comma. (ex:1-3,7-9)
all
−
Specifies all of the ports on the Switch.
mac_address <macaddr>
- Enter the MAC address to be re-authorized.
Restrictions Only
administrator-level
and operator-level users can issue this
command.
Example usage:
To configure 802.1x reauthentication for ports 1-18:
DGS-3627:5#config 802.1x reauth port_based ports 1-11
Command: config 802.1x reauth port_based ports 1-11
Success.
DGS-3627:5#
config radius add
Purpose
Used to configure the settings the Switch will use to communicate with a
RADIUS server.
Syntax
config radius add <server_index 1-3> <server_ip> key <passwd 32>
[default | {auth_port <udp_port_number 1-65535> | acct_port
<udp_port_number 1-65535>}]
