xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
44
delete snmp group
Purpose
Used to remove an SNMP group from the Switch.
Syntax
delete snmp group <groupname 32>
Description
The
delete snmp group
command is used to remove an SNMP
group from the Switch.
Parameters
<groupname 32>
−
An alphanumeric name of up to
32
characters that
will identify the SNMP group with which the new SNMP user will be
associated.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
DGS-3627:5#delete snmp group sg1
Command: delete snmp group sg1
Success.
DGS-3627:5#
show snmp groups
Purpose
Used to display the group-names of SNMP groups currently configured on
the Switch. The security model, level, and status of each group are also
displayed.
Syntax
Show snmp groups
Description
The
show snmp groups
command displays the group-names of SNMP
groups currently configured on the Switch. The security model, level, and
status of each group are also displayed.
Parameters
None.
Restrictions
Only administrator-level and operator-level users can issue this command.
Example usage:
To display the currently configured SNMP groups on the Switch:
DGS-3627:5#show snmp groups
Command: show snmp groups
Vacm Access Table Settings
Group Name : Group3
ReadView Name : ReadView
WriteView Name : WriteView
Notify View Name : NotifyView
Security Model : SNMPv3
Security Level : NoAuthNoPriv
Group Name : initial
ReadView Name : restricted
WriteView Name :
Notify View Name : restricted
Security Model : SNMPv3
Security Level : NoAuthNoPriv
Group Name : ReadGroup
