D-Link Wireless N User Manual Download Page 89

Page: 89 / 153

D-Link DIR-815 User Manual

Section 3 - Configuration

To use the Universal Plug and Play (UPnP

™

) feature

click on

Enabled

. UPNP provides compatibility with

networking equipment, software and peripherals.

Unchecking the box will not allow the DIR-815 to

respond to pings. Blocking the Ping may provide some

extra security from hackers. Check the box to allow

the Internet port to be “pinged”.

You may set the port speed of the Internet port to

10Mbps, 100Mbps, or auto. Some older cable or DSL

modems may require you to set the port speed to

10Mbps.

Check the

Enable.Multicast.Streams

box to allow

multicast traffic to pass through the router from the

Internet.

Check the

Enable.IPv6.Multicast.Streams

box to

allow multicast traffic to pass through the router from

the Internet.

Enable UPnP:

Enable WAN Ping

Response:

WAN Port Speed:

Enable Multicast

Streams:

Enable IPv6

Multicast Streams:

Advanced Network

Click the

Save.Settings

button to save any changes made.

Summary of Contents for Wireless N


























































































































































Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands

D-Link Wireless N, User Manual

Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands