D-Link Wireless N User Manual Download Page 57

Page: 57 / 153

D-Link DIR-815 User Manual

Section 3 - Configuration

Parental Controls

Advanced DNS:

Open DNS

FamilyShield:

Open DNS

Parental Controls:

None:

Faster, more reliable Internet browsing.

Includes Advanced DNS™ and automatic protection

from malware, phishing, and adult websites. This

option uses OpenDNS®.

Includes Advanced DNS™, FamilyShield™, and

customizable blocking of malware and phishing sites.

You may also customize filtering of web content by

category. This option uses OpenDNS®.

DNS servers will be provided via DHCP by your ISP or

you may manually enter DNS servers.

Advanced DNS Service is a free security option that provides anti-phishing protection to your network and offers navigation

improvements such as auto-correction of common URL typos.

Summary of Contents for Wireless N


























































































































































Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands

D-Link Wireless N, User Manual

Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands