D-Link Wireless N User Manual Download Page 133

Page: 133 / 153

128

D-Link DIR-815 User Manual

Appendix A - Wireless Basics

Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as

much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other

devices that operate on batteries.

Who.uses.wireless?.

Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business,

D-Link has a wireless solution for it.

Home

• Gives everyone at home broadband access

• Surf the web, check email, instant message, etc.

• Gets rid of the cables around the house

• Simple and easy to use

Small.Office.and.Home.Office

• Stay on top of everything at home as you would at office

• Remotely access your office network from home

• Share Internet connection and printer with multiple computers

• No need to dedicate office space

Summary of Contents for Wireless N


























































































































































Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands

D-Link Wireless N, User Manual

Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands