D-Link Wireless N User Manual Download Page 53

Page: 53 / 153

D-Link DIR-815 User Manual

Section 3 - Configuration

This section will allow you to change the local network settings of the router and to configure the DHCP settings.

Network Settings

Enter the IP address of the router. The default IP address is

192.168.0.1.

If you change the IP address, once you click

Save.Settings

you will need to enter the new IP address in your browser

to get back into the configuration utility.

Enter the Subnet Mask. The default subnet mask is

255.255.255.0.

Enter a name for the router.

Enter the Domain name (Optional).

Uncheck the box to transfer the DNS server information from

your ISP to your computers. If checked, your computers will

use the router for a DNS server.

Router IP Address:

Default Subnet

Mask:

Host Name:

Local Domain

Name:

Enable DNS Relay:

Router Settings

Summary of Contents for Wireless N


























































































































































Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands

D-Link Wireless N, User Manual

Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands