D-Link Wireless N User Manual Download Page 77

Page: 77 / 153

D-Link DIR-815 User Manual

Section 3 - Configuration

Network Filter

Select

Turn.MAC.Filtering.OFF

Turn.MAC.Filtering.ON.

and.ALLOW.computers.listed.to.access.the.network

Turn.MAC.Filtering.ON.and.DENY.computers.listed.

to.access.the.network

from the drop-down menu.

Check the box on the left side to enable the Network

Filter.

Enter the MAC address you would like to filter.

To find the MAC address on a computer, please refer to

the

Networking Basics

section in this manual.

Select a DHCP client from the

Computer.Name

drop-

down menu and click

<<.

to copy that MAC Address.

The schedule of time when the Network Filter will be

enabled. The schedule may be set to Always, which will

allow the particular service to always be enabled. Click

the

New.Schedule

button to create your own schedule.

Configure MAC

Filtering:

Enable Checkbox:

MAC Address:

DHCP Client List:

Schedule:

Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from

accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are

currently connected to the Broadband Router.

Click the

Save.Settings

button to save any changes made.

Summary of Contents for Wireless N


























































































































































Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands

D-Link Wireless N, User Manual

Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands