D-Link Wireless N User Manual Download Page 103

Page: 103 / 153

D-Link DIR-815 User Manual

Section 3 - Configuration

This page displays the current information for the DIR-815. It will display the LAN, WAN (Internet), and Wireless information. If your Internet

connection is set up for a Dynamic IP address then a

Release

button and a

Renew

button will be displayed. Use

Release

to disconnect

from your ISP and use

Renew

to connect to your ISP.

If your Internet connection is set up for PPPoE, a

Connect

button and a

Disconnect

button will be displayed. Use

Disconnect

to drop

the PPPoE connection and use

Connect

to establish the PPPoE connection.

Device Info

Status

Displays the router’s time and firmware version.

Displays the MAC address and the public IP settings

Displays the MAC address and the private (local) IP settings for the router.

Displays the wireless MAC address and your wireless settings such as SSID and

Channel. The first Wireless LAN section is for the 2.4GHz segment and the second

section is for the 5GHz segment.

Displays computers and devices that are connected to the router via Ethernet

and that are receiving an IP address assigned by the router (DHCP).

General:

WAN:

LAN:

Wireless LAN:

LAN Computers:

Summary of Contents for Wireless N


























































































































































Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands

D-Link Wireless N, User Manual

Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands