D-Link Wireless N User Manual Download Page 54

Page: 54 / 153

D-Link DIR-815 User Manual

Section 3 - Configuration

DHCP Server Settings

DHCP stands for Dynamic Host Control Protocol. The DIR-815 has a built-in DHCP server. The DHCP Server will automatically

assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting

their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load

the proper TCP/IP settings provided by the DIR-815. The DHCP Server will automatically allocate an unused IP address from

the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.

Check this box to enable the DHCP server on your router.

Uncheck to disable this function.

Enter the starting and ending IP addresses for the DHCP server’s

IP assignment.

Note:

If you statically (manually) assign IP addresses to your

computers or devices, make sure the IP addresses are outside of

this range or you may have an IP conflict.

The length of time for the IP address lease. Enter the Lease time

in minutes.

Enable this feature to broadcast your networks DHCP server to

LAN/WLAN clients.

NetBIOS allows LAN hosts to discover all other computers within

the network, enable this feature to allow the DHCP Server to

offer NetBIOS configuration settings.

Enable this feature to allow WINS information to be learned from the WAN side, disable to allow manual configuration.

This feature allows the configuration of a NetBIOS ‘domain’ name under which network hosts operates. This setting has no effect if

the ‘Learn NetBIOS information from WAN’ is activated.

Enable DHCP

Server:

DHCP IP Address

Range:

DHCP Lease Time:

Always

Broadcast:

NetBIOS

Announcement:

Learn NetBIOS

from WAN:

NetBIOS Scope:

Summary of Contents for Wireless N


























































































































































Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands

D-Link Wireless N, User Manual

Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands