D-Link Wireless N User Manual Download Page 81

Page: 81 / 153

D-Link DIR-815 User Manual

Section 3 - Configuration

Configure Web

Filtering:

Enable Checkbox:

Website URL:

Schedule:

Website Filter

Select

Turn.OFF.Website.Filtering

ALLOW.computers.

access.to.ONLY.these.sites

, or

DENY.computers.access.

to.ONLY.these.sites

from the drop-down menu.

Check the box on the left side to enable the Website Filter.

Enter the keywords or URLs that you want to allow or block.

The schedule of time when the Website Filter will be

enabled. The schedule may be set to Always, which will

allow the particular service to always be enabled. Click

the

New.Schedule

button to create your own schedule.

Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network.

Click the

Save.Settings

button to save any changes made.

Summary of Contents for Wireless N


























































































































































Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands

D-Link Wireless N, User Manual

Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands