D-Link Wireless N User Manual Download Page 139 | Manualshive

Page: 139 / 153

background image

134

D-Link DIR-815 User Manual

Trademarks:

D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their

respective owners.

Copyright Statement:

No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any

derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the

United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.

Copyright ©2012 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.

CE Mark Warning:

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take

adequate measures.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this

equipment.

«
...
137
138
139
140
141
...
»

Summary of Contents for Wireless N


























































































































































Reviews:

No comments

Related manuals for Wireless N

Brand: ALTAI Pages: 16

OmniAccess Stellar AP1301 Series

Brand: Alcatel-Lucent Enterprise Pages: 2

UniFi AP FlexHD

Brand: Ubiquiti Pages: 22

Brand: Hisense Pages: 5

BLUESOCKET 3045

Brand: ADTRAN Pages: 2

Brand: Acer Pages: 63

Brand: Acer Pages: 38

Predator Connect X5 5G CPE

Brand: Acer Pages: 56

Brand: Acer Pages: 39

Brand: Acer Pages: 7

Brand: Caimore Pages: 83

Brand: ZyXEL Communications Pages: 144

Brand: ZyXEL Communications Pages: 206

Brand: ZyXEL Communications Pages: 225

nova AX3000 EX12

Brand: Tenda Pages: 16

Brand: Tenda Pages: 72

Brand: Tenda Pages: 92

Brand: Digisol Pages: 86

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands