D-Link Wireless N User Manual Download Page 84

Page: 84 / 153

D-Link DIR-815 User Manual

Section 3 - Configuration

Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. If this computer

obtains it’s IP address automatically using DHCP, be sure to make a static reservation on the

Setup

Network.Settings

page so

that the IP address of the DMZ machine does not change.

Allows multiple machines on the LAN to connect to their corporate network using PPTP protocol.

Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through

NAT. This ALG may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network,

try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports

NAT traversal.

Allows application that uses Real Time Streaming Protocol to receive streaming media from the Internet. QuickTime and Real Player

are some of the common applications using this protocol.

Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have

the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are

having trouble making VoIP calls, try turning this ALG off.

DMZ IP Address:

PPTP:

IPSEC (VPN):

RTSP:

SIP:

Summary of Contents for Wireless N


























































































































































Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands

D-Link Wireless N, User Manual

Search results

Summary of Contents for Wireless N

Reviews:

Related manuals for Wireless N

Brands by name

Popular brands