30
D-Link DIR-815 User Manual
Section 3 - Configuration
Select Static IP if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In most
cases, select Dynamic.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password
in the next box.
Enter the ISP Service Name (optional).
Use the radio buttons to specify the reconnect mode.
The user can specify a custom schedule or specify the
On.
Demand
or
Manual
option. To specify a custom schedule,
use the drop-down menu to select one of the schedules
that has been defined in the
Tools.
>
Schedules
window.
To create a new schedule, click the
New.Schedule
button
Refer to “Schedules” on page 97 for more information.
Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
Enter the Primary and Secondary DNS Server Addresses
(Static PPPoE only).
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnect
Mode:
Maximum Idle
Time:
DNS Servers:
PPPoE (Username/Password)
Select
PPPoE.(Username/Password)
from the drop-down menu if your ISP uses a PPPoE connection. Your ISP will provide you
with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from
your computer. The software is no longer needed and will not work through a router.
Summary of Contents for Wireless N
Page 1: ......
Page 111: ...106 D Link DIR 815 User Manual Section 3 Configuration Support ...
