DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
45
TFTP Services
Trivial File Transfer Protocol
(TFTP) services allow the Switch’s firmware to be upgraded by transferring
a new firmware file from a TFTP server to the Switch or vice versa. Use the pull-down menu to select the
service to be completed.
Download Firmware
is used to transfer a firmware file from an outside source to
the Switch using the TFTP Protocol.
Download Configuration
is used to transfer a configuration file from
an outside source to the Switch using the TFTP Protocol.
Upload Configuration
is used to transfer a
configuration file from the Switch to an outside source using the TFTP Protocol.
Upload Log
is used to
transfer the Switch’s log file from the Switch to an outside source using the TFTP Protocol. Once the user
has selected an operation to perform, enter the
Server IP Address
and the path of the filename in use and
click
Start
to initiate the file transfer. To view this window, click
Administration
>
TFTP Services
Figure 6- 18. TFTP Services screen
Ping Test
Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination node
then responds to or "echoes" the packets sent from the Switch. This is very useful to verify connectivity
between the Switch and other nodes on the network. To view this window, click
Administration
>
Ping
Test
Figure 6- 19. Ping Test
The user may use Infinite times radio button, in the
Repeat Pinging for:
field, which will tell the ping
program to keep sending ICMP Echo packets to the specified IP address until the program is stopped. The
user may opt to choose a specific number of times to ping the
Target IP Address
by clicking its radio
button and entering a number between 1 and 255. The user can also choose a
Time Out
for the ping, which
will terminate the ping request if no response packet has returned to the Switch in the allotted time. Click
Start
to initiate the Ping program.
Summary of Contents for DES-3010F
Page 260: ...247 ...
