manualshive.com logo in svg

D-Link DES-3010F, User Manual

The D-Link DES-3010F is a high-performance switch designed for small to medium-sized networks. With this reliable and versatile device, users can easily manage their network connections. Access the comprehensive user manual, available for free download at manualshive.com, to maximize the potential of this product and ensure a smooth network operation.

Share
Download
background image

 

 

CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, 
WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, LOSS OF INFORMATION OR 
DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-
LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING 
TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, 
EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE 
REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, 
REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. 
 

GOVERNING LAW

: This Limited Warranty shall be governed by the laws of the state of California. 

 
Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on 
how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited 
warranty provides specific legal rights and the product owner may also have other rights which vary from 
state to state. 
 

Trademarks 

Copyright 2008 D-Link Corporation. Contents subject to change without prior notice. D-Link is a registered 
trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective 
proprietors. 
 

Copyright Statement 

No part of this publication may be reproduced in any form or by any means or used to make any derivative 
such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link 
Systems Inc., as stipulated by the United States Copyright Act of 1976. 
 

FCC Warning 
 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in accordance with this manual, may 
cause harmful interference to radio communications. Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will be required to correct the interference at his 
own expense. 

 

 
 
 

 

Summary of Contents for DES-3010F





































































































































































































































































Reviews:

No comments

Related manuals for DES-3010F

3xLogic V250 Quick Start Manual preview
V250
Brand: 3xLogic Pages: 2
Wattle Pegasus Quick Installation Manual preview
Pegasus
Brand: Wattle Pages: 6
Baicells Nova430i Quick Manual preview
Nova430i
Brand: Baicells Pages: 8
Qualys GUARD Quick Start Manual preview
GUARD
Brand: Qualys Pages: 2
Planet ADSL 2/2+ Router with USB Port ADE-3410v2 User Manual preview
ADSL 2/2+ Router with USB Port ADE-3410v2
Brand: Planet Pages: 62
LogLogic LX 1010 Quick Start Manual preview
LX 1010
Brand: LogLogic Pages: 30
Mercusys MR30G Quick Installation Manual preview
MR30G
Brand: Mercusys Pages: 35
Multitech MultiConnect SE MTS2EA Specification Sheet preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 2
Abocom HomePlug AV Ethernet Bridge PLE0200 Quick Install preview
HomePlug AV Ethernet Bridge PLE0200
Brand: Abocom Pages: 2
Dialogic DM/IP601-CPCI-100BT Quick Install Card preview
DM/IP601-CPCI-100BT
Brand: Dialogic Pages: 2
IntesisBox IBOX-BAC Series Installation Sheet preview
IBOX-BAC Series
Brand: IntesisBox Pages: 2
Linksys WRT54GR - Wireless-G Broadband Router Quick Installation Manual preview
WRT54GR - Wireless-G Broadband Router
Brand: Linksys Pages: 81
Buffalo LinkStation Quick Setup Manual preview
LinkStation
Brand: Buffalo Pages: 2
KonNad SinoCon C2000-C2-SHK0401-BB1 User Manual preview
SinoCon C2000-C2-SHK0401-BB1
Brand: KonNad Pages: 12
Nexxt NOVA300 AML02304U1 User Manual preview
NOVA300 AML02304U1
Brand: Nexxt Pages: 75
Compro Technology RS-2104 Quick Installation Manual preview
RS-2104
Brand: Compro Technology Pages: 2
Korenix JetNet 3705 User Manual preview
JetNet 3705
Brand: Korenix Pages: 25
Federal Signal Corporation AR2000-M Installation And Maintenance Manual preview
AR2000-M
Brand: Federal Signal Corporation Pages: 49

Brands by name

Popular brands

Load more brands