DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
79
Enabled
– When option 61 is enabled, if the packets do not have option 61 then the relay
servers cannot be determined based on option 61. If the relay servers are determined
based on option 61 then the IPIF configured servers will be ignored.
Disabled
– If the relay server is not determined then the IPIF configured servers will be used
to determine the relay servers.
DHCP Relay Agent
Information Option 82
State
This field can be toggled between
Enabled
and
Disabled
using the pull-down menu. It is
used to enable or disable the DHCP Agent Information Option 82 on the Switch. The default
is
Disabled.
Enabled
– When this field is toggled to
Enabled
the relay agent will insert and remove
DHCP relay information (option 82 field) in messages between DHCP servers and clients.
When the relay agent receives the DHCP request, it adds the option 82 information, and the
IP address of the relay agent (if the relay agent is configured), to the packet. Once the
option 82 information has been added to the packet it is sent on to the DHCP server. When
the DHCP server receives the packet, if the server is capable of option 82, it can implement
policies like restricting the number of IP addresses that can be assigned to a single remote
ID or circuit ID. Then the DHCP server echoes the option 82 field in the DHCP reply. The
DHCP server unicasts the reply to the back to the relay agent if the request was relayed to
the server by the relay agent. The switch verifies that it originally inserted the option 82
data. Finally, the relay agent removes the option 82 field and forwards the packet to the
switch port that connects to the DHCP client that sent the DHCP request.
Disabled -
If the field is toggled to
Disabled
the relay agent will not insert and remove DHCP
relay information (option 82 field) in messages between DHCP servers and clients, and the
check and policy settings will have no effect.
DHCP Relay Agent
Information Option 82
Check
This field can be toggled between
Enabled
and
Disabled
using the pull-down menu. It is
used to enable or disable the Switches ability to check the validity of the packet’s option 82
field.
Enabled
– When the field is toggled to
Enable
, the relay agent will check the validity of the
packet’s option 82 field. If the switch receives a packet that contains the option-82 field from
a DHCP client, the switch drops the packet because it is invalid. In packets received from
DHCP servers, the relay agent will drop invalid messages.
Disabled -
When the field is toggled to
Disabled
, the relay agent will not check the validity of
the packet’s option 82 field.
DHCP Relay Agent
Information Option 82
Policy
This field can be toggled between
Replace, Drop,
and
Keep
by using the pull-down menu.
It is used to set the Switches policy for handling packets when the
DHCP Agent
Information Option 82 Check
is set to
Disabled
. The default is
Replace.
Replace
- The option 82 field will be replaced if the option 82 field already exists in the
packet received from the DHCP client.
Drop
- The packet will be dropped if the option 82 field already exists in the packet received
from the DHCP client.
Keep
-The option 82 field will be retained if the option 82 field already exists in the packet
received from the DHCP client.
Click
Apply
to implement any changes that have been made.
NOTE:
If the Switch receives a packet that contains the option-82 field from a DHCP client and the
information-checking feature is enabled, the switch drops the packet because it is invalid. However, in
some instances, you might configure a client with the option-82 field. In this situation, you should
disable the information-check feature so that the switch does not remove the option-82 field from the
packet. You can configure the action that the switch takes when it receives a packet with existing
option-82 information by configuring the
DHCP Agent Information Option 82 Policy.
Summary of Contents for DES-3010F
Page 260: ...247 ...
