manualshive.com logo in svg

D-Link DES-3010F, User Manual

The D-Link DES-3010F is a high-performance switch designed for small to medium-sized networks. With this reliable and versatile device, users can easily manage their network connections. Access the comprehensive user manual, available for free download at manualshive.com, to maximize the potential of this product and ensure a smooth network operation.

Share
Download
background image

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual 

 

15

Section 4 

Introduction to Switch Management 

Management Options 

Web-based Management Interface 

SNMP-Based Management 

Managing User Accounts 

Command Line Console Interface through the Serial Port 

Connecting the Console Port (RS-232 DCE) 

First Time Connecting to the Switch 

Password Protection 

SNMP Settings 

IP Address Assignment 

Connecting Devices to the Switch 

Management Options 

This system may be managed out-of-band through the console port on the front panel or in-band using 
Telnet. The user may also choose the web-based management, accessible through a web browser. 

Web-based Management Interface 

After you have successfully installed the Switch, you can configure the Switch, monitor the LED panel, and 
display statistics graphically using a web browser, such as Netscape Navigator (version 6.2 and higher) or 
Microsoft® Internet Explorer (version 5.0). 

SNMP-Based Management 

You can manage the Switch with an SNMP-compatible console program. The Switch supports SNMP 
version 1.0, version 2.0c and version 3.0. The SNMP agent decodes the incoming SNMP messages and 
responds to requests with MIB objects stored in the database. The SNMP agent updates the MIB objects to 
generate statistics and counters. 

Command Line Console Interface through the Serial Port 

You can also connect a computer or terminal to the serial console port to access the Switch. The command-
line-driven interface provides complete access to all Switch management features.  

Connecting the Console Port (RS-232 DCE) 

The Switch provides an RS-232 serial port that enables a connection to a computer or terminal for 
monitoring and configuring the Switch. This port is a female DB-9 connector, implemented as a data 
terminal equipment (DTE) connection. 
To use the console port, you need the following equipment: 

•

 

A terminal or a computer with both a serial port and the ability to emulate a terminal. 

•

 

A null modem or crossover RS-232 cable with a female DB-9 connector for the console port on the Switch. 

Summary of Contents for DES-3010F





































































































































































































































































Reviews:

No comments

Related manuals for DES-3010F

3Com EtherLink 3C509B Quick Manual preview
EtherLink 3C509B
Brand: 3Com Pages: 8
3Com 3CR860-95 - OfficeConnect Secure Router Features And Benefits preview
3CR860-95 - OfficeConnect Secure Router
Brand: 3Com Pages: 2
3Com 3C905-TX Installation Manual preview
3C905-TX
Brand: 3Com Pages: 26
H3C SR6600 Series Faq preview
SR6600 Series
Brand: H3C Pages: 22
H3C S5800-60C-PWR Ordering Manual preview
S5800-60C-PWR
Brand: H3C Pages: 3
WAGO 852-1417 Operating And Assembly Instructions preview
852-1417
Brand: WAGO Pages: 2
Niveo NWAR33P User Manual preview
NWAR33P
Brand: Niveo Pages: 155
Premio FlacheSAN1L-D4 Quick Manual preview
FlacheSAN1L-D4
Brand: Premio Pages: 3
Idis DR-1508P Operation Manual preview
DR-1508P
Brand: Idis Pages: 85
Riverbed SteelCentral AppResponse 2180 Upgrade And Maintenance Manual preview
SteelCentral AppResponse 2180
Brand: Riverbed Pages: 82
M-system M5XSBS Instruction Manual preview
M5XSBS
Brand: M-system Pages: 4
Kramer VS-162AVM User Manual preview
VS-162AVM
Brand: Kramer Pages: 56
Kasda KE318EU User Manual preview
KE318EU
Brand: Kasda Pages: 39
CSI 7798 I/SITE LAN Installation Manual preview
7798 I/SITE LAN
Brand: CSI Pages: 56
Alvarion BreezeNET DS.11 Configuration Utility Release Note preview
BreezeNET DS.11 Configuration Utility
Brand: Alvarion Pages: 2
Beck com.tom INDUSTRY 100.WLAN.W Startup Manual preview
com.tom INDUSTRY 100.WLAN.W
Brand: Beck Pages: 2
NETGEAR DGN2200M - Wireless-N 300 Router User Manual preview
DGN2200M - Wireless-N 300 Router
Brand: NETGEAR Pages: 95
LevelOne GNC-0112 Quick Installation Manual preview
GNC-0112
Brand: LevelOne Pages: 10

Brands by name

Popular brands

Load more brands