manualshive.com logo in svg

D-Link DES-3010F, User Manual

The D-Link DES-3010F is a high-performance switch designed for small to medium-sized networks. With this reliable and versatile device, users can easily manage their network connections. Access the comprehensive user manual, available for free download at manualshive.com, to maximize the potential of this product and ensure a smooth network operation.

Share
Download
background image

 

 

Table of Contents 

 

Preface..............................................................................................................................................................ix

 

Intended Readers............................................................................................................................................................................ x

 

Typographical Conventions ............................................................................................................................................................................x

 

Notes, Notices, and Cautions ......................................................................................................................................................... x

 

Safety Instructions......................................................................................................................................................................... xi

 

Safety Cautions ..............................................................................................................................................................................................xi

 

Protecting Against Electrostatic Discharge ................................................................................................................................................. xiii

 

Introduction......................................................................................................................................................1

 

Switch Description ......................................................................................................................................................................... 1

 

Features...........................................................................................................................................................................................................1

 

Ethernet Technology ...................................................................................................................................................................... 3

 

Fast Ethernet ...................................................................................................................................................................................................3

 

Gigabit Ethernet Technology ..........................................................................................................................................................................3

 

Switching Technology ....................................................................................................................................................................................3

 

Front-Panel Components and LED Indicators.................................................................................................................................................5

 

Rear Panel Description....................................................................................................................................................................................7

 

Side Panel Description ....................................................................................................................................................................................7

 

Installation ........................................................................................................................................................8

 

Package Contents ............................................................................................................................................................................................8

 

Before You Connect to the Network ...............................................................................................................................................................8

 

Installing the Switch without the Rack............................................................................................................................................................9

 

Installing the Switch in a Rack........................................................................................................................................................................9

 

Mounting the Switch in a Standard 19" Rack ............................................................................................................................................9

 

Power On ...................................................................................................................................................................................................9

 

The Optional Modules ..................................................................................................................................................................................10

 

Connecting the Switch ...................................................................................................................................12

 

Switch to End Node ......................................................................................................................................................................................12

 

Switch to Hub or Switch ...............................................................................................................................................................................13

 

DES-3010F/FL/G, DES-3016/DES-3018 or DES-3026 as a Network Backbone....................................................................................14

 

Introduction to Switch Management ...........................................................................................................15

 

Management Options ................................................................................................................................................................... 15

 

Web-based Management Interface................................................................................................................................................................15

 

SNMP-Based Management...........................................................................................................................................................................15

 

Command Line Console Interface through the Serial Port............................................................................................................................15

 

Connecting the Console Port (RS-232 DCE)...........................................................................................................................................15

 

First Time Connecting to the Switch.............................................................................................................................................................17

 

Password Protection......................................................................................................................................................................................18

 

SNMP Settings..............................................................................................................................................................................................18

 

Traps ........................................................................................................................................................................................................19

 

MIBs ........................................................................................................................................................................................................19

 

IP Address Assignment .................................................................................................................................................................................20

 

Summary of Contents for DES-3010F





































































































































































































































































Reviews:

No comments

Related manuals for DES-3010F

Paradyne Hotwire 5446 Notice preview
Hotwire 5446
Brand: Paradyne Pages: 2
Paradyne Hotwire 6381 Installation Instructions Manual preview
Hotwire 6381
Brand: Paradyne Pages: 20
Paradyne Hotwire 6381 Upgrade Instructions preview
Hotwire 6381
Brand: Paradyne Pages: 2
Zhone Hotwire 6381 Quick Installation Instructions preview
Hotwire 6381
Brand: Zhone Pages: 2
Paradyne COMSPHERE 6800 Series Multiplexer Management And Configuration Manual preview
COMSPHERE 6800 Series
Brand: Paradyne Pages: 155
Paradyne COMSPHERE 6800 Series Communications Products Support Configuration Manual preview
COMSPHERE 6800 Series
Brand: Paradyne Pages: 44
NetBurner MOD5272 Quick Start Manual preview
MOD5272
Brand: NetBurner Pages: 15
CELOT CTR-180 User Manual preview
CTR-180
Brand: CELOT Pages: 34
Lanner NCA-1040 User Manual preview
NCA-1040
Brand: Lanner Pages: 59
StarTech.com ST1000SMPEX Instruction Manual preview
ST1000SMPEX
Brand: StarTech.com Pages: 9
Westermo Ibex-RT-330-HV User Manual preview
Ibex-RT-330-HV
Brand: Westermo Pages: 34
PairGain PG-Flex FLC-704 Manual preview
PG-Flex FLC-704
Brand: PairGain Pages: 20
3Com 3C433279A Release Note preview
3C433279A
Brand: 3Com Pages: 12
Ubiquiti PBE-M5-400-ISO Quick Start Manual preview
PBE-M5-400-ISO
Brand: Ubiquiti Pages: 28
ADTRAN DUAL Nx56/64 1200142L1# User Manual preview
DUAL Nx56/64 1200142L1#
Brand: ADTRAN Pages: 48
C&H Technologies EM405-8 User Manual preview
EM405-8
Brand: C&H Technologies Pages: 50
H3C SecPath L5030 Installation Manual preview
SecPath L5030
Brand: H3C Pages: 62
Allied Telesis AT-WR4500 Series User Manual preview
AT-WR4500 Series
Brand: Allied Telesis Pages: 264

Brands by name

Popular brands

Load more brands