D-Link DES-3010F User Manual Download Page 250

Page: 250 / 260

Technical Support

You can find software updates and user documentation on the D-

Link website.

Tech Support for customers in

Australia:

Tel: 1300-766-868

Monday to Friday 8:00am to 8:00pm EST

Saturday 9:00am to 1:00pm EST

http://www.dlink.com.au

e-mail:

[email protected]

India:

Tel: 1800-222-002

Monday to Friday 9:30AM to 7:00PM

http://www.dlink.co.in/support/productsupport.aspx

Indonesia, Malaysia, Singapore and Thailand:

Tel:

+62-21-5731610 (Indonesia)

Tel: 1800-882-880

(Malaysia)

Tel: +65 66229355

(Singapore)

Tel: +66-2-719-8978/9

(Thailand)

Monday to Friday 9:00am to 6:00pm

http://www.dlink.com.sg/support/

e-mail: [email protected]

Korea:

Tel: +82-2-890-5496

Monday to Friday 9:00am to 6:00pm

http://

www.d-link.co.kr

e-mail:

[email protected]

New Zealand:

Tel: 0800-900-900

Monday to Friday 8:30am to 8:30pm

Saturday 9:00am to 5:00pm

http://www.dlink.co.nz

e-mail: [email protected]

Summary of Contents for DES-3010F





































































































































































































































































Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands

D-Link DES-3010F, User Manual

Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands