D-Link DES-3010F User Manual Download Page 196

Page: 196 / 260

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

183

Log Settings

Use the

Log Settings

menu to define the schedule or terms used for saving the Switch log. To view this

table click,

Monitoring

Log Settings

Figure 11- 18. Log Settings menu

Select the desired

Log Mode

and click the

Apply

button to put into effect.

Parameter Description

Log Mode

Use the pull-down menu to select the desired method to save log files. The user has three
options:

on_demand -

Specifies that logs are saved when requested by the host receiving the log.

log_trigger -

Specifies that logs are saved when previously configured triggers require the

log to be saved to the Syslog host. Use the

config syslog host

command to determine what

triggers are used.

time_interval

– Choose this option to save log files periodically, based on the time specified

in the Time Interval field.

Time Interval

Specifies the minimum interval between saves in minutes.

Click

Apply

to implement changes made.

Summary of Contents for DES-3010F





































































































































































































































































Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands

D-Link DES-3010F, User Manual

Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands