DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
53
SNMP Host Table
Use the
SNMP Host Table
to set up SNMP trap recipients.
To view the
SNMP Host Table
window click
Administration
>
SNMP Manager >
SNMP Host Table
Figure 6- 30. SNMP Host Table
To delete an existing
SNMP Host Table
entry, click the corresponding button under the
Delete
heading.
To add a new entry to the Switch's
SNMP Host Table
, click the
Add
button in the upper left-hand corner of
the page. This will open the
SNMP Host Table Configuration
page, as shown below.
Figure 6- 30. SNMP Host Table Configuration window
The following parameters can set:
Parameter Description
Host IP Address
Type the IP address of the remote management station that will serve as the SNMP host
for the Switch.
SNMP Version
V1
- To specifies that SNMP version 1 will be used.
V2
- To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv
- To specify that the SNMP version 3 will be used, with a NoAuth-
NoPriv security level.
V3-Auth-NoPriv
- To specify that the SNMP version 3 will be used, with an Auth-NoPriv
security level.
V3-Auth-Priv
- To specify that the SNMP version 3 will be used, with an Auth-Priv security
level.
Community String or
SNMP V3 User Name
Type in the community string or SNMP V3 user name as appropriate.
To implement your new settings, click
Apply.
To return to the
SNMP Host Table
, click the
Show All
SNMP Host Table Entries
link.
Summary of Contents for DES-3010F
Page 260: ...247 ...
