D-Link DES-3010F User Manual Download Page 231

Page: 231 / 260

Tech Support

Technical Support

You can find software updates and user documentation on the

D-Link website.

D-Link provides free technical support for customers within the

United States and within Canada for the duration of the service

period, and warranty confirmation service, during the warranty

period on this product. U.S. and Canadian customers can

contact D-Link technical support through our website, or by

phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

(877) 354-6555

Monday to Friday 8:00am to 5:00pm PST

D-Link Technical Support over the Internet:

http://support.dlink.com

email:[email protected]

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

1-800-361-5265

Monday to Friday 7:30am to 9:00pm EST

D-Link Technical Support over the Internet:

http://support.dlink.com

email: [email protected]

Summary of Contents for DES-3010F





































































































































































































































































Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands

D-Link DES-3010F, User Manual

Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands