manualshive.com logo in svg

D-Link DES-3010F, User Manual

The D-Link DES-3010F is a high-performance switch designed for small to medium-sized networks. With this reliable and versatile device, users can easily manage their network connections. Access the comprehensive user manual, available for free download at manualshive.com, to maximize the potential of this product and ensure a smooth network operation.

Share
Download
background image

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual 

 

134

 

                                                                 Figure 10- 1. Traffic Control Settings window 

The Switch will also scan and monitor packets coming into the Switch by monitoring the Switch’s chip 
counter. This method is only viable for Broadcast and Multicast storms because the chip only has counters 
for these two types of packets. Once a storm has been detected (that is, once the packet threshold set below 
has been exceeded), the Switch will shutdown the port to all incoming traffic with the exception of STP 
BPDU packets, for a time period specified using the 

Count Down 

field. Although the Count Down field can 

be specified, users are advised to disable this feature and assess the situation before recovering the port. The 
Count Down field may be disabled by entering a value of 0 (zero). 
If this field times out and the packet storm continues, the port will be placed in a Shutdown Forever mode 
which will produce a warning message to be sent to the Trap Receiver. Once in Shutdown Forever mode, the 
user may recover the affected ports by using the Traffic Control Recover section of the previous window 
and recover the ports shutdown forever. To utilize this method of Storm Control, choose the 

Shutdown

 

option of the

 Action

 field in the window below. 

Use the 

Traffic Control

 menu to enable or disable storm control and adjust the threshold for multicast and 

broadcast storms, as well as any unknown storms. To view the window above, click 

Security > Traffic 

Control

: 

To configure 

Traffic Control

, enable or disable the

 Broadcast Storm

, 

Multicast Storm

 and 

Unknown 

Unicast Storm 

using their corresponding pull-down menus. Click 

Apply

 to implement changes made. 

 

 

Summary of Contents for DES-3010F





































































































































































































































































Reviews:

No comments

Related manuals for DES-3010F

ABB i-bus KNX IPR/S 3.5.1 Product Manual preview
i-bus KNX IPR/S 3.5.1
Brand: ABB Pages: 44
D-Linke DHP-346AV Quick Installation Manual preview
DHP-346AV
Brand: D-Linke Pages: 32
Watchguard Wireless Router Quick Start Manual preview
Wireless Router
Brand: Watchguard Pages: 11
D-Link DWR-712 Quick Installation Manual preview
DWR-712
Brand: D-Link Pages: 32
D-Link DIR-456 Quick Installation Manual preview
DIR-456
Brand: D-Link Pages: 28
D-Link DIR-820 Quick Installation Manual preview
DIR-820
Brand: D-Link Pages: 48
D-Link EXO DIR-2660 Quick Installation Manual preview
EXO DIR-2660
Brand: D-Link Pages: 83
D-Link DIR-508L User Manual preview
DIR-508L
Brand: D-Link Pages: 155
Magnat Audio MC 200 Faq preview
MC 200
Brand: Magnat Audio Pages: 2
X-Micro WLAN 11g User Manual preview
WLAN 11g
Brand: X-Micro Pages: 74
Aruba IntroSpect Analyzer 2 Series Quick Start Manual preview
IntroSpect Analyzer 2 Series
Brand: Aruba Pages: 5
National Instruments FieldPoint FP-3000 User Manual preview
FieldPoint FP-3000
Brand: National Instruments Pages: 118
ZKTeco HVR0402 User Manual preview
HVR0402
Brand: ZKTeco Pages: 68
Belkin F5D7230au4P Manual preview
F5D7230au4P
Brand: Belkin Pages: 2
IDT 89HPES12T3G2 Preliminary User'S Manual preview
89HPES12T3G2
Brand: IDT Pages: 146
H3C S3610 Series Operation Manual preview
S3610 Series
Brand: H3C Pages: 28
Siemens gigaset SX761 DSL Installation Manual preview
gigaset SX761 DSL
Brand: Siemens Pages: 10
Siemens RUGGEDCOM RS940G Installation Manual preview
RUGGEDCOM RS940G
Brand: Siemens Pages: 36

Brands by name

Popular brands

Load more brands