D-Link DES-3010F User Manual Download Page 87

Page: 87 / 260

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

Multicast Filtering Mode

Use the

Multicast Filtering Mode Setting

menu to select one of two filtering options for multicast packets:

•

Forward unregistered groups

– This default setting will forward all multicast streams.

•

Filter unregistered groups

– This setting will only forward multicasts to registered multicast groups.

Multicasts to unregistered groups are blocked.

To view this window, click

Administration

Forwarding & Filtering

Multicast Filtering Mode

Figure 6- 59. Configure Multicast Filtering Mode

Select the desired Multicast Filtering Mode setting and click

Apply

to effect the change.

Summary of Contents for DES-3010F





































































































































































































































































Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands

D-Link DES-3010F, User Manual

Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands