manualshive.com logo in svg

D-Link DES-3010F, User Manual

The D-Link DES-3010F is a high-performance switch designed for small to medium-sized networks. With this reliable and versatile device, users can easily manage their network connections. Access the comprehensive user manual, available for free download at manualshive.com, to maximize the potential of this product and ensure a smooth network operation.

Share
Download
background image

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual 

 

78

DHCP/BOOTP Relay 

The relay hops count limit allows the maximum number of hops (routers) that the DHCP/BOOTP messages 
can be relayed through to be set. If a packet’s hop count is more than the hop count limit, the packet is 
dropped. The range is between 

1

 and 

16

 hops, with a default value of 

4

. The relay time threshold sets the 

minimum time (in seconds) that the Switch will wait before forwarding a BOOTREQUEST packet. If the 
value in the seconds field of the packet is less than the relay time threshold, the packet will be dropped. The 
range is between 

0

 and 

65,536

 seconds, with a default value of 

0

 seconds. 

DHCP/BOOTP Relay Global Settings 

To enable and configure 

DHCP/BOOTP Relay Global Settings

 on the Switch, click

 Administration

 > 

DHCP/BOOTP Relay > DHCP/BOOTP Relay Global Settings 

 

 

Figure 6- 62. DHCP/

 

BOOTP Relay Global Settings window 

The following fields can be set: 

Parameter 

                Description 

BOOTP Relay State  

This field can be toggled between 

Enabled

 and 

Disabled

 using the pull-down menu. It is 

used to enable or disable the DHCP/BOOTP Relay service on the Switch. The default is 

Disabled

 

BOOTP Relay Hops 
Count Limit (1-16)  

This field allows an entry between 

1

 and 

16

 to define the maximum number of router hops 

DHCP/BOOTP messages can be forwarded across. The default hop count is 

4

. 

BOOTP Relay Time 
Threshold (0-65535) 

Allows an entry between 

0

 and 

65535

 seconds, and defines the maximum time limit for 

routing a DHCP/BOOTP packet. If a value of 0 is entered, the Switch will not process the 
value in the 

seconds

 field of the BOOTP or DHCP packet. If a non-zero value is entered, 

the Switch will use that value, along with the hop count to determine whether to forward a 
given BOOTP or DHCP packet. 

DHCP Vendor class 
Identifier option 60 
State 

Allows the user to 

Enable

 or 

Disable

 the DHCP relay option 60 on the Switch. The default is 

Disabled

.  

Enabled

 – Allows the relay servers priority based on option 60.  If the relay servers are 

determined based on option 60 then the IPIF configured servers will be ignored.   

Disabled

 – If the relay server is not determined then the IPIF configured servers will be used 

to determine the relay servers.   

DHCP Client identifier 
option 61 State 

Allows the user to 

Enable

 or

 Disable

 the DHCP relay option 61 state on the Switch. The 

default is 

Disabled

.   

Summary of Contents for DES-3010F





































































































































































































































































Reviews:

No comments

Related manuals for DES-3010F

Paradyne 4300 Installation Instructions Manual preview
4300
Brand: Paradyne Pages: 22
H3C RA100 Installation Manual preview
RA100
Brand: H3C Pages: 34
LaCie 8BIG RACK THUNDERBOLT 2 Quick Start Manual preview
8BIG RACK THUNDERBOLT 2
Brand: LaCie Pages: 28
Paradyne Adapter Bracket Notice preview
Adapter Bracket
Brand: Paradyne Pages: 1
IBM J02M Quick Start Manual preview
J02M
Brand: IBM Pages: 32
Jetter JetWeb JX2-PR0FI1 Operator'S Manual preview
JetWeb JX2-PR0FI1
Brand: Jetter Pages: 67
Radicom WiFiHU2S-a/c Preliminary Designer’S Manual preview
WiFiHU2S-a/c
Brand: Radicom Pages: 27
TRENDnet TE100-S16 - 10/100Mbps Ethernet Switch User Manual preview
TE100-S16 - 10/100Mbps Ethernet Switch
Brand: TRENDnet Pages: 15
ETL TeleCLIENT TC7730 Series User Manual preview
TeleCLIENT TC7730 Series
Brand: ETL Pages: 83
Zoom Realtek Series User Manual preview
Realtek Series
Brand: Zoom Pages: 31
NETGEAR ReadyNAS 3220 Series Datasheet preview
ReadyNAS 3220 Series
Brand: NETGEAR Pages: 4
KYLAND Technology KIEN1009 Hardware Installation Manual preview
KIEN1009
Brand: KYLAND Technology Pages: 24
SainSmart Genmitsu CNC Assembly Instruction Manual preview
Genmitsu CNC
Brand: SainSmart Pages: 12
Tripp Lite P581-006 Specification Sheet preview
P581-006
Brand: Tripp Lite Pages: 2
XtendLan XL-VC102SB User Manual preview
XL-VC102SB
Brand: XtendLan Pages: 17
TP-Link TD-8840 User Manual preview
TD-8840
Brand: TP-Link Pages: 25
Hamlet HRDSL108W Quick Installation Manual preview
HRDSL108W
Brand: Hamlet Pages: 6
Vivotek ND9312 User Manual preview
ND9312
Brand: Vivotek Pages: 185

Brands by name

Popular brands

Load more brands