D-Link DES-3010F User Manual Download Page 152

Page: 152 / 260

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

139

Port Lock Entries

The

Port Lock Entry Delete

window is used to remove an entry from the port security entries learned by

the Switch and entered into the forwarding database. To view the following window, click

Security > Port

Lock Entries

Figure 10- 3. Port Lock Entries Table

This function is only operable if the

Mode

in the

Port Security

window is selected as

Permanent

DeleteOnReset,

or in other words, only addresses that are permanently learned by the Switch can be

deleted. Once the entry has been defined by entering the correct information into the window above, click
the under the

Delete

heading of the corresponding MAC address to be deleted. Click the

Next

button to

view the next page of entries listed in this table. This window displays the following information:

Parameter Description

VID

The VLAN ID of the entry in the forwarding database table that has been permanently learned by
the Switch.

VLAN NAME

The VLAN Name of the entry in the forwarding database table that has been permanently learned
by the Switch.

MAC Address

The MAC address of the entry in the forwarding database table that has been permanently learned
by the Switch.

Port

The ID number of the port that has permanently learned the MAC address.

Type

The type of MAC address in the forwarding database table. Only entries marked

Secured_Permanent

can be deleted.

Delete

Click the in this field to delete the corresponding MAC address that was permanently learned by
the Switch.

Summary of Contents for DES-3010F





































































































































































































































































Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands

D-Link DES-3010F, User Manual

Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands