DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
147
Figure 10- 13. 802.1X Authenticator Settings – Modify window
This screen allows you to set the following parameters:
Parameter Description
From……To
Use the drop down menu to enter the port or ports to be set.
AdmDir
Sets the administrative-controlled direction to either
in
or
both
.
If
in
is selected, control is only exerted over incoming traffic through the port you
selected in the first field.
If
both
is selected, control is exerted over both incoming and outgoing traffic through
the controlled port selected in the first field.
PortControl
This allows you to control the port authorization state.
Select
forceAuthorized
to disable 802.1X and cause the port to transition to the
authorized state without any authentication exchange required. This means the port
transmits and receives normal traffic without 802.1X-based authentication of the
client.
If
forceUnauthorized
is selected, the port will remain in the unauthorized state,
ignoring all attempts by the client to authenticate. The Switch cannot provide
authentication services to the client through the interface.
If
Auto
is selected, it will enable 802.1X and cause the port to begin in the
unauthorized state, allowing only EAPOL frames to be sent and received through the
port. The authentication process begins when the link state of the port transitions from
down to up, or when an EAPOL-start frame is received. The Switch then requests the
identity of the client and begins relaying authentication messages between the client
and the authentication server.
The default setting is
Auto
.
TxPeriod
This sets the
TxPeriod
of time for the authenticator PAE state machine. This value
determines the period of an EAP Request/Identity packet transmitted to the client. The
default setting is 30 seconds.
QuietPeriod
This allows you to set the number of seconds that the Switch remains in the quiet
Summary of Contents for DES-3010F
Page 260: ...247 ...
