D-Link DES-3010F User Manual Download Page 168

Page: 168 / 260

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

155

This window displays the following information:

Parameter Description

Port

The port number of the reauthenticated port.

Auth State

The Authenticator State will display one of the following:

Initialize, Disconnected, Connecting,

Authenticating, Authenticated, Aborting, Held, ForceAuth

ForceUnauth.

BackendState

The Backend State will display one of the following:

Request, Response, Success, Fail,

Timeout, Idle

Initialize.

OpenDir

The Operational Controlled Directions are

both

and

PortStatus

The status of the controlled port can be

Authorized

Unauthorized

NOTE:

The user must first globally enable 802.1X in the

DES-3026 Web Management Tool

window before reauthenticating ports. Information in the

Reauthenticate Ports Table

cannot be

viewed before enabling 802.1X.

NOTE:

The uplink module ports (DES-3010F/G ports 9-10, DES-3018 ports 17-18, DES-3026

ports 25-26) do not support the 802.1X function.

Reauthenticate Port(s) for MAC-based 802.1X

To reauthenticate ports for the MAC side of 802.1X, the user must first enable 802.1X by MAC address in
the

Advanced Settings

window. To view the following window, click

Security > 802.1X > Reauthenticate

Port(s)

Figure 10- 21. Reauthenticate Ports – MAC based 802.1X

To reauthenticate ports, first choose the range of ports in the

From

and

field. Then the user must specify

the MAC address to be reauthenticated by entering it into the

MAC Address

field and checking the

corresponding check box. To begin the reauthentication, click

Apply

Summary of Contents for DES-3010F





































































































































































































































































Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands

D-Link DES-3010F, User Manual

Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands