manualshive.com logo in svg

D-Link DES-3010F, User Manual

The D-Link DES-3010F is a high-performance switch designed for small to medium-sized networks. With this reliable and versatile device, users can easily manage their network connections. Access the comprehensive user manual, available for free download at manualshive.com, to maximize the potential of this product and ensure a smooth network operation.

Share
Download
background image

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual 

 

1

Section 1      

Introduction 

Ethernet Technology 

Switch Description  

Features 

Ports 

Front-Panel Components 

Side Panel Description 

Rear Panel Description 

Gigabit Combo Ports 

Ethernet Technology 

Fast Ethernet Technology 

 

The following manual describes the installation, maintenance and configurations concerning members of the 
DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Switch group. These switches are 
identical in configurations and very similar in basic hardware and consequentially, most of the information 
in this manual will be universal to the total group of Switches. Corresponding screen pictures of the web 
manager may be taken from any one of these switches but the configuration will be identical, except for 
varying port counts. For the remainder of this document, we will refer primarily to the DES-3026 as the 
switch in question for examples, configurations and explanations. 

Switch Description 

The DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 is a high performance 8/16/24-
port Fast Ethernet switch. Comprising 10/100Mbps switched unshielded twisted-pair (UTP) and Auto MDI-
X/MDI-II convertible ports, and each model having its own uplink port capability, this Switch will be ideal 
for segmenting networks into smaller, sub-connected networks for optimum throughput capability of the 
most demanding multimedia and imaging applications available on the network without creating 
bottlenecks. These ports can also be used for connecting PCs, printers, servers, hubs, routers, switches and 
other networking devices, each supporting up to 200 Mbps of throughput in full-duplex mode. 
The open slots available on the DES-3018/DES-3026 models, the gigabit port on the DES-3010G and the 
fiber-optic port on the DES-3010F and DES-3010FL can provide an uplink to a server or network backbone. 
The built-in console interface can be used to configure the Switch’s settings for priority queuing, VLANs, 
and port trunk groups, port monitoring, and port speed.

 

Features 

•

 

IEEE 802.3z compliant 

•

 

IEEE 802.3x Flow Control in full-duplex compliant 

•

 

IEEE 802.3u compliant 

•

 

IEEE 802.3ab compliant 

•

 

IEEE 802.1p Priority Queues 

•

 

IEEE 802.3ad Link Aggregation Control Protocol support. 

•

 

IEEE 802.1X Port-based and MAC-based Access Control 

•

 

IEEE 802.1Q VLAN 

•

 

IEEE 802.1D Spanning Tree and IEEE 802.1w Rapid Spanning Tree 

Summary of Contents for DES-3010F





































































































































































































































































Reviews:

No comments

Related manuals for DES-3010F

QTech QSR-3920 Series Configuration Manual preview
QSR-3920 Series
Brand: QTech Pages: 120
Profile LS901-E1 Instruction Manual preview
LS901-E1
Brand: Profile Pages: 6
Oracle Talari E1000 Installation Manual preview
Talari E1000
Brand: Oracle Pages: 24
Watchguard Firebox T20-W Quick Start Manual preview
Firebox T20-W
Brand: Watchguard Pages: 40
Teknim TWM-1886 Installation & User Manual preview
TWM-1886
Brand: Teknim Pages: 10
WolfPack 18x18 Card Cage User Manual preview
18x18 Card Cage
Brand: WolfPack Pages: 31
Ubiquiti EdgeSwtch 5XP Quick Start Manual preview
EdgeSwtch 5XP
Brand: Ubiquiti Pages: 13
TP-Link VIGI NVR1004H-4P Quick Installation Manual preview
VIGI NVR1004H-4P
Brand: TP-Link Pages: 2
NBase NH 210 Installation And User Manual preview
NH 210
Brand: NBase Pages: 18
Gearlinx NR4400 Series User'S Quick Start Manual preview
NR4400 Series
Brand: Gearlinx Pages: 23
Alcatel-Lucent Service Aggregation Router 7705 Installation Manual preview
Service Aggregation Router 7705
Brand: Alcatel-Lucent Pages: 20
Pakedge RT-3100 Quick Start Manual preview
RT-3100
Brand: Pakedge Pages: 8
MikroTik RouterBOARD RB711-5HnD Quick Setup Manual And Warranty Information preview
RouterBOARD RB711-5HnD
Brand: MikroTik Pages: 2
Umniah 3G Evo Router User Manual preview
3G Evo Router
Brand: Umniah Pages: 12
Billion BIPAC 7500 Quick Start Manual preview
BIPAC 7500
Brand: Billion Pages: 12
HeimVision HM243 User Manual preview
HM243
Brand: HeimVision Pages: 167
Digi TransPort WR11 XT Quick Start Manual preview
TransPort WR11 XT
Brand: Digi Pages: 4
Yeastar Technology Yeastar TE200 User Manual preview
Yeastar TE200
Brand: Yeastar Technology Pages: 42

Brands by name

Popular brands

Load more brands