manualshive.com logo in svg

D-Link DES-3010F, User Manual

The D-Link DES-3010F is a high-performance switch designed for small to medium-sized networks. With this reliable and versatile device, users can easily manage their network connections. Access the comprehensive user manual, available for free download at manualshive.com, to maximize the potential of this product and ensure a smooth network operation.

Share
Download
background image

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual 

 

8

SECTION 2 

Installation 

Package Contents 

Before You Connect to the Network 

Installing the Switch without the Rack 

Rack Installation 

Power On 

The Optional Module 

Redundant Power System 

Package Contents 

Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the 
following items: 

•

 

One DES-3010F, DES-3010FL, DES-3010G, DES-3016, DES-3018, or DES-3026 Fast Ethernet Switch 

•

 

Mounting kit (two brackets and screws) 

•

 

Four rubber feet with adhesive backing 

•

 

One AC power cord  

•

 

RS-232 console cable 

•

 

One CD Kit for User’s Guide / CLI / D-View module / SNMP module 

•

 

This Manual with Registration Card. 

If any item is missing or damaged, please contact your local D-Link Reseller for replacement. 

Before You Connect to the Network 

The site where you install the Switch may greatly affect its performance. Please follow these guidelines for 
setting up the Switch. 

•

 

Install the Switch on a sturdy, level surface that can support the weight of the Switch. Do not place heavy objects on the 
Switch. 

•

 

The power outlet should be within 1.82 meters (6 feet) of the Switch. 

•

 

Visually inspect the power cord and see that it is fully secured to the AC power port. 

•

 

Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Leave at least 10 cm (4 
inches) of space at the front and rear of the Switch for ventilation. 

•

 

Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity operating ranges. 

•

 

Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust, and direct 
exposure to sunlight. 

•

 

When installing the Switch on a level surface, attach the rubber feet to the bottom of the device. The rubber feet 
cushion the Switch, protect the casing from scratches and prevent it from scratching other surfaces. 

Summary of Contents for DES-3010F





































































































































































































































































Reviews:

No comments

Related manuals for DES-3010F

3Com EtherLink 3C509B Quick Manual preview
EtherLink 3C509B
Brand: 3Com Pages: 8
4RF Aprisa LTE Quick Start Manual preview
Aprisa LTE
Brand: 4RF Pages: 7
Accelerated 6330-MX User Manual preview
6330-MX
Brand: Accelerated Pages: 10
Accelerated 6300-CX Customer Setup Instructions preview
6300-CX
Brand: Accelerated Pages: 4
A10 Thunder Series Manual preview
Thunder Series
Brand: A10 Pages: 52
Edgewater Networks 200EW/E Quick Start Manual preview
200EW/E
Brand: Edgewater Networks Pages: 7
Far Tools MR 40PB Original Manual Translation preview
MR 40PB
Brand: Far Tools Pages: 24
B&B Electronics 232CC1A Product Information preview
232CC1A
Brand: B&B Electronics Pages: 2
Conel UR5i v2 SL User Manual preview
UR5i v2 SL
Brand: Conel Pages: 32
Dahua D-NVR4108HS-4KS2/L Quick Start Manual preview
D-NVR4108HS-4KS2/L
Brand: Dahua Pages: 33
DCB BROADCAST POLLING FRAD BPF-14 BU Manual preview
BROADCAST POLLING FRAD BPF-14 BU
Brand: DCB Pages: 28
Hunter Pro-C Series Programming Instructions preview
Pro-C Series
Brand: Hunter Pages: 2
Juniper MX480 Hardware Manual preview
MX480
Brand: Juniper Pages: 420
National Instruments PXI PXITM -1000 User Manual preview
PXI PXITM -1000
Brand: National Instruments Pages: 55
Patton electronics ipRocketLink IAD 3086 Quick Start Manual preview
ipRocketLink IAD 3086
Brand: Patton electronics Pages: 12
Vaisala TERMBOX-9000 User Manual preview
TERMBOX-9000
Brand: Vaisala Pages: 32
ADTRAN DUAL Nx56/64 1200142L1# User Manual preview
DUAL Nx56/64 1200142L1#
Brand: ADTRAN Pages: 48
Pullnet AGENT-2 S41D Line User Manual preview
AGENT-2 S41D Line
Brand: Pullnet Pages: 89

Brands by name

Popular brands

Load more brands