D-Link DES-3010F User Manual Download Page 251

Page: 251 / 260

Technical Support

You can find software updates and user documentation on the D-

Link website.

Tech Support for customers in

Egypt:

Tel: +202-2919035 or +202-2919047

Sunday to Thursday 9:00am to 5:00pm

http://support.dlink-me.com

e-mail:

[email protected]

Iran:

Tel: +98-21-88822613

Sunday to Thursday 9:00am to 6:00pm

http://support.dlink-me.com

e-mail:

[email protected]

Israel:

Tel: +972-9-9715701

Sunday to Thursday 9:00am to 5:00pm

http://www.dlink.co.il/support/

e-mail:

[email protected]

Pakistan:

Tel: +92-21-4548158 or +92-21-4548310

Sunday to Thursday 9:00am to 6:00pm

http://support.dlink-me.com

e-mail:

[email protected]

South Africa and Sub Sahara Region:

Tel: +27-12-665-2165

08600 DLINK (for South Africa only)

Monday to Friday 8:30am to 9:00pm South Africa Time

http://www.d-link.co.za

Turkey:

Tel: +90-212-2895659

Monday to Friday 9:00am to 6:00pm

http://www.dlink.com.tr

e-mail: [email protected]

U.A.E and North Africa:

Tel: +971-4-391-6480 (U.A.E)

Sunday to Wednesday 9:00am to 6:00pm GMT+4

Thursday 9:00am to 1:00pm GMT+4

http://support.dlink-me.com

e-mail: [email protected]

Summary of Contents for DES-3010F





































































































































































































































































Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands

D-Link DES-3010F, User Manual

Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands