manualshive.com logo in svg

D-Link DES-3010F, User Manual

The D-Link DES-3010F is a high-performance switch designed for small to medium-sized networks. With this reliable and versatile device, users can easily manage their network connections. Access the comprehensive user manual, available for free download at manualshive.com, to maximize the potential of this product and ensure a smooth network operation.

Share
Download
background image

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual 

 

ix

Preface 

The DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 User Manual is divided into 
sections that describe the system installation and operating instructions with examples.  

 
Section 1, Introduction

 - Describes the Switch and its features. 

 
Section 2, Installation

- Helps you get started with the basic installation of the Switch and also describes the 

front panel, rear panel, side panels, and LED indicators of the Switch. 

 
Section 3, Connecting the Switch

 - Tells how you can connect the Switch to your Ethernet network. 

 
Section 4, Introduction to Switch Management

 - Introduces basic Switch management features, including 

password protection, SNMP settings, IP address assignment and connecting devices to the Switch. 

 
Section 5, Introduction to Web-based Switch Management

 – This section discusses connecting to and 

using the Web-based switch management feature on the Switch. 

 
Section 6, Administration

- A detailed discussion about configuring some of the basic functions of the 

Switch, including accessing the Switch information, using the Switch's utilities and setting up network 
configurations, such as assigning an IP address, Port Configurations, User Accounts, Password Encryption, 
Cable Diagnostics, Port Mirroring, System Log Settings, SNTP Settings, MAC Notification Settings, TFTP 
Services, Ping Test, SNMP Manager, IP-MAC Binding, Single IP Setting, Forwarding & Filtering, SMTP 
Service and DHCP/BOOTP Relay. 

 
Section 7, L2 Features 

- A discussion of the layer 2 features of the Switch, including Static VLAN Entry, 

VLAN Trunk Settings, Trunking, IGMP Snooping, Spanning Tree and Loopback Detection. 

 
Section 8, CoS

 - A detailed discussion regarding Port Bandwidth, 802.1p Default Priority, 802.1p User 

Priority, CoS Scheduling Mechanism, CoS Output Scheduling, Priority Settings, TOS Priority Settings, 
DSCP Priority Settings, Port Mapping Priority Settings and MAC Priority. 

 
Section 9, CPU Interface Filtering – 

This section deals with the CPU Interface Filtering features on this 

Switch, including CPU Interface Filtering State and CPU Interface Filtering Table. 

 
Section 10

, 

Security – 

A detailed discussion about the security features on the Switch including Traffic 

Control, Port Security, Port Lock Entries, 802.1X, Trusted Host, Traffic Segmentation and SSH. 

 
Section 11, Monitoring

 - Features graphs and screens used in monitoring features and packets on the 

Switch including CPU Utilization, Port Utilization, Packers, Packet Errors, Packet Size, VLAN Status, 
MAC Address, Switch Log, Log Settings, IGMP Snooping Group, Browse Router Port, Browse ARP Table 
and Session Table.  
 

Appendix A, Technical Specifications

 – This discusses the technical specifications of the DES 3016, DES-

3010F, DES-3010FL, DES-3010G, DES-3018 and DES-3026 switches. 

 
Appendix B, Cables and Connectors

 - Describes the RJ-45 receptacle/connector, straight-through and 

crossover cables and standard pin assignments. 

 
Appendix C, Cable Lengths

 – Gives information on cable types and maximum distances. 

 
Glossary 

- Lists definitions for terms and acronyms used in this document. 

Summary of Contents for DES-3010F





































































































































































































































































Reviews:

No comments

Related manuals for DES-3010F

D-Link DSL-2750U Setup preview
DSL-2750U
Brand: D-Link Pages: 14
D-Link DVG-7022S Quick Installation Manual preview
DVG-7022S
Brand: D-Link Pages: 7
D-Link DIR-878 Quick Installation Manual preview
DIR-878
Brand: D-Link Pages: 41
Ubiquiti ER-4 Quick Start Manuals preview
ER-4
Brand: Ubiquiti Pages: 22
Ubiquiti UniFi UAP-AC-LR Quick Start Manual preview
UniFi UAP-AC-LR
Brand: Ubiquiti Pages: 28
Zonet ZEW1505 Quick Installation Manual preview
ZEW1505
Brand: Zonet Pages: 10
Samsung NAS Series Hardware User Manual preview
NAS Series
Brand: Samsung Pages: 65
D-Link G416 User Manual preview
G416
Brand: D-Link Pages: 176
Vonets MINI300 Quick Setting Manual preview
MINI300
Brand: Vonets Pages: 8
XNET INS2000 Install Manual preview
INS2000
Brand: XNET Pages: 17
Patton IPLink 2603 Series User Manual preview
IPLink 2603 Series
Brand: Patton Pages: 120
Ubiquiti EdgeRouter PoE ERPoe-5 Quick Start Manual preview
EdgeRouter PoE ERPoe-5
Brand: Ubiquiti Pages: 13
National Instruments NI 447 Series User Manual preview
NI 447 Series
Brand: National Instruments Pages: 80
Tripp Lite N201-001-BL Specification Sheet preview
N201-001-BL
Brand: Tripp Lite Pages: 3
OneAccess One80XM Installation Manual preview
One80XM
Brand: OneAccess Pages: 47
Linksys WRK54G User Manual preview
WRK54G
Brand: Linksys Pages: 80
Hi-flying HF-LPB User Manual preview
HF-LPB
Brand: Hi-flying Pages: 59
LevelOne FBR-1412TX User Manual preview
FBR-1412TX
Brand: LevelOne Pages: 83

Brands by name

Popular brands

Load more brands