manualshive.com logo in svg

D-Link DES-3010F, User Manual

The D-Link DES-3010F is a high-performance switch designed for small to medium-sized networks. With this reliable and versatile device, users can easily manage their network connections. Access the comprehensive user manual, available for free download at manualshive.com, to maximize the potential of this product and ensure a smooth network operation.

Share
Download
background image

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual 

 

175

 

Figure 11- 10. Rx Error Analysis window (table) 

The following fields can be set: 

Parameter                       Description 

Time Interval [1s] 

Select the desired setting between 1s and 60s, where "s" stands for seconds. The default 
value is one second. 

Record Number [200] 

Select number of times the Switch will be polled between 20 and 200. The default value is 
200. 

Crc Error 

Counts otherwise valid packets that did not end on a byte (octet) boundary. 

UnderSize 

The number of packets detected that are less than the minimum permitted packets size of 64 
bytes and have a good CRC. Undersize packets usually indicate collision fragments, a nor-
mal network occurrence. 

OverSize 

Counts packets received that were longer than 1518 octets, or if a VLAN frame is 1522 
octets, and less than the MAX_PKT_LEN. Internally, MAX_PKT_LEN is equal to 1522. 

Fragment 

The number of packets less than 64 bytes with either bad framing or an invalid CRC. These 
are normally the result of collisions. 

Jabber 

The number of packets with lengths more than the MAX_PKT_LEN bytes. Internally, 
MAX_PKT_LEN is equal to 1522. 

Drop 

The number of packets that are dropped by this port since the last Switch reboot. 

Show/Hide 

Check whether or not to display Crc Error, Under Size, Over Size, Fragment, Jabber, and 
Drop errors. 

Clear 

Clicking this button clears all statistics counters on this window. 

View Table 

Clicking this button instructs the Switch to display a table rather than a line graph. 

View Line Chart 

Clicking this button instructs the Switch to display a line graph rather than a table. 

Summary of Contents for DES-3010F





































































































































































































































































Reviews:

No comments

Related manuals for DES-3010F

Baracoda All in One Printer Communication Protocol Manual preview
All in One Printer
Brand: Baracoda Pages: 42
Lab.gruppen NLB 60E Operation Manual preview
NLB 60E
Brand: Lab.gruppen Pages: 35
ADTRAN NetVanta 6355 PoE Installation Manual preview
NetVanta 6355 PoE
Brand: ADTRAN Pages: 46
LGC wireless InterReach Fusion SingleStar Installation And Operation Manual preview
InterReach Fusion SingleStar
Brand: LGC wireless Pages: 154
B&B Electronics RS-232/422/485 Serial Card CE 3PXCC4A User Manual preview
RS-232/422/485 Serial Card CE 3PXCC4A
Brand: B&B Electronics Pages: 47
Gigabyte GN-WLMA101 User Manual preview
GN-WLMA101
Brand: Gigabyte Pages: 18
Cypress PSoC 4 S Series Quick Start Manual preview
PSoC 4 S Series
Brand: Cypress Pages: 4
iGateWeb.com iGate User Manual preview
iGate
Brand: iGateWeb.com Pages: 6
Axis P3365-V Installation Manual preview
P3365-V
Brand: Axis Pages: 98
Broadband Products Xtreme Networked Boat User Manual preview
Xtreme Networked Boat
Brand: Broadband Products Pages: 16
R.V.R. Elettronica PTX30-UHT Installation, Technical And Maintenance Manual preview
PTX30-UHT
Brand: R.V.R. Elettronica Pages: 171
Juniper LN1000 - RELEASE NOTES 8-27-2010 User Manual preview
LN1000 - RELEASE NOTES 8-27-2010
Brand: Juniper Pages: 64
NETGEAR ReadyNAS Duo v2 Software Manual preview
ReadyNAS Duo v2
Brand: NETGEAR Pages: 100
ICP DAS USA ZT-2005-C8 User Manual preview
ZT-2005-C8
Brand: ICP DAS USA Pages: 60
IC Realtime nvr700ns User Manual preview
nvr700ns
Brand: IC Realtime Pages: 131
Costar CDC2500LX User Manual preview
CDC2500LX
Brand: Costar Pages: 51
Infrant Technologies ReadyNAS NV Getting Started Manual preview
ReadyNAS NV
Brand: Infrant Technologies Pages: 8
Billion BiPAC 7700N User Manual preview
BiPAC 7700N
Brand: Billion Pages: 168

Brands by name

Popular brands

Load more brands