manualshive.com logo in svg

D-Link DES-3010F, User Manual

The D-Link DES-3010F is a high-performance switch designed for small to medium-sized networks. With this reliable and versatile device, users can easily manage their network connections. Access the comprehensive user manual, available for free download at manualshive.com, to maximize the potential of this product and ensure a smooth network operation.

Share
Download
background image

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual 

 

161

SSH Authentication Mode and Algorithm Settings 

The SSH Authentication window allows the configuration of the desired types of SSH algorithms used for 
authentication encryption. There are three categories of algorithms listed and specific algorithms of each 
may be enabled or disabled by using their corresponding pull-down menus. All algorithms are enabled by 
default. To open the following window, click 

Security > SSH > SSH Authentication Mode and 

Algorithm Settings 
 

 

Figure 10- 27. SSH Server Authentication Mode and Algorithm Settings window 

 
The following algorithms may be set: 

Parameter                             Description 

Authentication Algorithm 

Password 

This field may be enabled or disabled to choose if the administrator wishes to use a 
locally configured password for authentication on the Switch. This field is 

Enabled 

by 

default. 

Public Key 

This field may be enabled or disabled to choose if the administrator wishes to use a 
publickey configuration set on a SSH server, for authentication. This field is 

Enabled 

by 

default. 

Host-based 

This field may be enabled or disabled to choose if the administrator wishes to use a host 
computer for authentication. This parameter is intended for Linux users requiring SSH 

Summary of Contents for DES-3010F





































































































































































































































































Reviews:

No comments

Related manuals for DES-3010F

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
Eaton Network Card-MS User Manual preview
Network Card-MS
Brand: Eaton Pages: 89
LaCie d2 Network 2 Quick Install Manual preview
d2 Network 2
Brand: LaCie Pages: 44
LaCie LaCie Ethernet Disk Datasheet preview
LaCie Ethernet Disk
Brand: LaCie Pages: 2
LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Brand: LaCie Pages: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Brand: LaCie Pages: 14
LaCie 12big Rack Fibre 8 Quick Install Manual preview
12big Rack Fibre 8
Brand: LaCie Pages: 9
National Instruments NI 9219 Operating Instructions Manual preview
NI 9219
Brand: National Instruments Pages: 36
Draytek Vigor 2710e Quick Start Manual preview
Vigor 2710e
Brand: Draytek Pages: 8
Fortinet FortiAP S311C Quick Start Manual preview
FortiAP S311C
Brand: Fortinet Pages: 20
Usr USR4504 Installation Manual preview
USR4504
Brand: Usr Pages: 2
IBM totalstorage 200 Hardware Installation Manual preview
totalstorage 200
Brand: IBM Pages: 152
Zonet ZSR4134WS User Manual preview
ZSR4134WS
Brand: Zonet Pages: 53
TRENDnet TE100-S16 - 10/100Mbps Ethernet Switch User Manual preview
TE100-S16 - 10/100Mbps Ethernet Switch
Brand: TRENDnet Pages: 15
Lindsay Broadband LBON320AC Series Installation And Operation Manual preview
LBON320AC Series
Brand: Lindsay Broadband Pages: 4
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Brand: Pakedge Device & Software Pages: 14
Zigen IP-Logic ZIG-IPPRO-RX Quick Start Manual preview
IP-Logic ZIG-IPPRO-RX
Brand: Zigen Pages: 4
Fluke Network Tester User Manual preview
Network Tester
Brand: Fluke Pages: 102

Brands by name

Popular brands

Load more brands