D-Link DES-3010F User Manual Download

Page: 74 / 260

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

Holdtime

This parameter may be set for the time, in seconds the Switch will hold information sent to it
from other switches, utilizing the

Discovery Interval

. The user may set the hold time from

100 to 255 seconds.

Click

Apply

to implement the settings changed.

After enabling the Switch to be a Commander Switch (CS), the

Single IP Management

folder will then

contain three added links to aid the user in configuring SIM through the web, including

Topology

Firmware Upgrade

and

Configuration Backup/Restore

Topology

The

Topology

window will be used to configure and manage the Switch within the SIM group and requires

Java script to function properly on your computer.
The Java Runtime Environment on your server should initiate and lead you to the topology window, as seen
below.

Figure 6- 37. Single IP Management window - Tree View

The Tree View window holds the following information under the Data tab:

Parameter Description

Device Name

This field will display the

Device Name

of the switches in the SIM group configured by the

user. If no

Device Name

is configured by the name, it will be given the name default and

tagged with the last six digits of the MAC Address to identify it.

Local Port

Displays the number of the physical port on the CS that the MS or CaS is connected to. The
CS will have no entry in this field.

Summary of Contents for DES-3010F





































































































































































































































































Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands

D-Link DES-3010F, User Manual

Search results

Summary of Contents for DES-3010F

Reviews:

Related manuals for DES-3010F

Brands by name

Popular brands