manualshive.com logo in svg

Coyote Point Systems E350GX, Installation And Administration Manual

The Coyote Point Systems E350GX Installation And Administration Manual is a comprehensive guide that provides step-by-step instructions for setting up and managing your E350GX device. Download this manual for free from our website to easily configure and maximize the performance of your product.

Share
Download
background image

Chapter 5: Configuring Equalizer Operation

84

Equalizer Installation and Administration Guide

Requesting a License Offline

If your Equalizer is not currently connected to the Internet or if DNS is not configured for Equalizer, then you will 
need to request a license offline. To do this, follow this procedure:

1. Follow Steps 1 through 3 of the procedure above.

2. Select 

Offline License

 on the 

License Information

 screen:

Figure 24 The License Information screen -- Offline License

3. Select 

create license request file

 and save the file to an appropriate location on your local system.

4. Select the 

[email protected]

 link to open your browser’s mail client, or open your email client 

manually and specify this address in the 

To:

 field of a new mail message. Specify 

license request

 in the 

Subject

 field, and attach the license request file you saved in the previous step. Send the email.

5. Once Coyote Point processes your request, you will receive a signed license file in a return email from Coyote 

Point. Save the licensing file you receive from Coyote Point to an appropriate location on your local system.

6. Select 

install signed license file

 and use the browse box to select the signed license file you saved in the 

previous step.

7. Equalizer installs the license and asks you if you want to reboot to apply the license. Select 

reboot

 to reboot.

After the system comes back up, there should be no unlicensed error in the left frame or on the 

Help > About

 screen. 

If you licensed Envoy, the 

Help > About

 screen should show 

Envoy geographic load balancing enabled

 when the 

Equalizer System Information

 box is expanded.

Summary of Contents for E350GX

























































































































































































































































































































































Reviews:

No comments

Related manuals for E350GX

Samsung MX-T70 Manual preview
MX-T70
Brand: Samsung Pages: 60
Samsung MX-F630B Quick Manual preview
MX-F630B
Brand: Samsung Pages: 2
Samsung MM-ZB9 Manual De Instrucciones preview
MM-ZB9
Brand: Samsung Pages: 24
Samsung MM-B3 Manual Del Instrucción preview
MM-B3
Brand: Samsung Pages: 22
Samsung MAX-VJ650 Service Manual preview
MAX-VJ650
Brand: Samsung Pages: 23
dbx iEQ-15 User Manual preview
iEQ-15
Brand: dbx Pages: 16
Fisher RS-2010 Operating Instructions Manual preview
RS-2010
Brand: Fisher Pages: 14
Ferguson HearMe CD250BT Instruction Manual preview
HearMe CD250BT
Brand: Ferguson Pages: 13
Kenwood CR-ST700SCD Operating Manual preview
CR-ST700SCD
Brand: Kenwood Pages: 160
Curtis RCD739UK Instruction Manual preview
RCD739UK
Brand: Curtis Pages: 9
Sony CMT-BX1 Marketing Specifications preview
CMT-BX1 Marketing
Brand: Sony Pages: 2
APART MASK4C(T) Instruction Manual preview
MASK4C(T)
Brand: APART Pages: 24
Krell Industries KAV-300r Instructions For Use Manual preview
KAV-300r
Brand: Krell Industries Pages: 25
NuPrime AMG DAC User Manual preview
AMG DAC
Brand: NuPrime Pages: 21
Aiwa XR-H220MD Service Manual preview
XR-H220MD
Brand: Aiwa Pages: 62
Etec A707DXI Operating Instructions Manual preview
A707DXI
Brand: Etec Pages: 7
Etec E6335 User Manual preview
E6335
Brand: Etec Pages: 12
TAC SYSTEM ONKIO Install & Operation Manual preview
ONKIO
Brand: TAC SYSTEM Pages: 22

Brands by name

Popular brands

Load more brands