Coyote Point Systems E350GX Page 234 Installation And Administration Manual Download

Page: 234 / 344

Chapter 8: Using Match Rules

232

Equalizer Installation and Administration Guide

Click

commit

The new match rule is created and its

Configuration

tab is opened.

3. In the

expression

field, click on

any()

4. In the

Edit Match Rule

dialog:

Select

replace with client_ip

from the drop-down box.

b. In the

text box, specify a simple IP address (e.g., “192.168.0.240”), or an IP address in Classless Inter-

Domain Routing (CIDR) notation (e.g., “192.168.0.0/24”) to specify an entire subnet.

Click

continue

The

expression

field should now contain the

client_ip

function with the

argument you specified above.

5. In the

servers and options

field, look for the

spoof

option and disable both of the checkboxes to the right, in

this order:

Disable the

inherit from global

checkbox

b. Disable the

spoof

checkbox

Summary of Contents for E350GX

























































































































































































































































































































































Search results

Summary of Contents for E350GX

Reviews:

Related manuals for E350GX

Brands by name

Popular brands

Coyote Point Systems E350GX, Installation And Administration Manual

Search results

Summary of Contents for E350GX

Reviews:

Related manuals for E350GX

Brands by name

Popular brands