manualshive.com logo in svg

Coyote Point Systems E350GX, Installation And Administration Manual

The Coyote Point Systems E350GX Installation And Administration Manual is a comprehensive guide that provides step-by-step instructions for setting up and managing your E350GX device. Download this manual for free from our website to easily configure and maximize the performance of your product.

Share
Download
background image

Chapter 7: Monitoring Equalizer Operation

188

Equalizer Installation and Administration Guide

For each match rule in a Layer 7 cluster, the summary displays the following information:

If Envoy is enabled, GeoCluster names are also listed in the Cluster Summary table. For each site in a GeoCluster, 
the summary displays the following information:

Sticky

(Layer 4 clusters with a non-zero 

sticky time

 only): The number of inactive 

“sticky records” currently held by Equalizer. This equals the number of sticky 
records minus the number of 

Active

 connections (see above). See “Enabling 

Sticky Connections” on page 129.

Processed

The number of requests that have been 

evaluated

 by the Match Rule since the 

system was last rebooted. This number includes both requests that matched and 
did not match the match rule expression.

Site

The site name.

Status

Status indicators for each site in the GeoCluster: 

Up

 (responding to health check 

probes), 

Down

 (not responding to health check probes), 

Quiesced

 (not accepting 

new connections), and 

Hot Spare

 (only responding to requests when no site is 

marked 

Up

).

Weight

The site weights determine the relative proportion of connection requests that 
Equalizer routes to each site. These weights are the current, dynamically-adjusted 
values, not the initial weights initially assigned by the administrator. 

Times Chosen

The number of times this site was selected by geographic load balancing to 
respond to a client request.

Times Down

The number of times this site was down when geographic load balancing was 
attempting to select a site to respond to a client request.

Summary of Contents for E350GX

























































































































































































































































































































































Reviews:

No comments

Related manuals for E350GX

Bang & Olufsen BeoSystem 6500 User Manual preview
BeoSystem 6500
Brand: Bang & Olufsen Pages: 44
Aiwa XR-M70 Service Manual preview
XR-M70
Brand: Aiwa Pages: 14
Rotel RX-2001 Owner'S Manual preview
RX-2001
Brand: Rotel Pages: 15
Scott SMV100 Owner'S Manual preview
SMV100
Brand: Scott Pages: 29
Panasonic SC-PMX100B Operating Instructions Manual preview
SC-PMX100B
Brand: Panasonic Pages: 24
Iluv i198 Instruction Manual preview
i198
Brand: Iluv Pages: 36
Curtis RCD688 Instruction Manual preview
RCD688
Brand: Curtis Pages: 15
TECHWOOD DD81 Owner'S Manual preview
DD81
Brand: TECHWOOD Pages: 28
Blue Smoke THE BLACK BOX User Manual preview
THE BLACK BOX
Brand: Blue Smoke Pages: 31
Aiwa XR-M800 Service Manual preview
XR-M800
Brand: Aiwa Pages: 38
Rapnas MF-1 Owner'S Manual preview
MF-1
Brand: Rapnas Pages: 46
dBTechnologies ES 1203 User Manual preview
ES 1203
Brand: dBTechnologies Pages: 144
Zeck Audio VECTOR S3A Service Manual preview
VECTOR S3A
Brand: Zeck Audio Pages: 16
Lafayette LR-120DB Operating & Service Manual preview
LR-120DB
Brand: Lafayette Pages: 67
Daewoo AMI-716L Service Manual preview
AMI-716L
Brand: Daewoo Pages: 30
Yamaha RX-D485 Quick Start Manual preview
RX-D485
Brand: Yamaha Pages: 80
DAPAudio EQ-2231 Manual preview
EQ-2231
Brand: DAPAudio Pages: 11
LENCO MC-118 MP3 Brochure preview
MC-118 MP3
Brand: LENCO Pages: 1

Brands by name

Popular brands

Load more brands