Coyote Point Systems E350GX, Installation And Administration Manual

Page: 253 / 344

Working with Sites
Equalizer Installation and Administration Guide 249
Displaying Envoy Statistics
See “Displaying Envoy Statistics” on page 191.
Plotting GeoCluster History
See “Plotting GeoCluster Performance History” on page 197.
Working with Sites
GeoSites, or Sites, are defined within GeoClusters, so before you can configure your first site, you must first have
added a site as shown in the section “Adding a GeoCluster” on page 245.
Once you define a GeoCluster, you can open the GeoSite Summary table to add, modify, and delete GeoSites: click
the GeoCluster name in the left frame, and then click the Sites tab in the right frame. The following is an example of
a GeoSite Summary table with two sites configured:
The table shows the GeoSite Name, the DNS AAA Record IP address, and the Agent IP address supplied when the
sites were created. It also displays the current Status of each Site. The icons in the Actions column let you add,
modify, and delete GeoSites.
Adding a Site to a GeoCluster
1. Log into the Administrative Interface using a login that has
add/del
access for the GeoCluster (see “Logging
In” on page 52).
2. Do one of the following:
• In the left frame, right-click the name of the GeoCluster to which you want to add a Site, and select
Add Site
from the menu.
• Click the GeoCluster name in the left frame and open the
Sites
tab. Click the Add icon at the
bottom of the GeoCluster Summary table
Action
column.