Coyote Point Systems E350GX, Installation And Administration Manual

Page: 187 / 344

Displaying the Virtual Cluster Summary
Equalizer Installation and Administration Guide 187
Displaying the Virtual Cluster Summary
Select
Equalizer > Status > Cluster Summary
to open the Virtual Cluster Summary. This table displays basic status
and statistics for the currently configured virtual clusters, their associated servers, and Layer 7 match rules, as shown
in the example below:
Figure 39 Viewing cluster summary information
Click on a cluster name to open the summary for that cluster. For each server in a cluster, the table displays the
following information:
Servers
The server name.
Status
Status indicators for each server in the cluster:
Up
(responding to health check
probes),
Down
(not responding to health check probes),
Quiesced
(not accepting
new connections), and
Hot Spare
(only responding to requests when no server is
marked Up ).
Initial Weight
The initial server weight asigned to the server by the administrator. This weight is
used by Equalizer as it starts to load balance requests amongst the servers in the
cluster. For all load balancing policies other than
static weight and round robin ,
Equalizer adjusts the server initial weights to reflect the relative performance of
the servers in the cluster over time. The dynamically adjusted server weight is
displayed as
Current Weight in the table.
Current Weight
The dynamically adjusted server weight used by equalizer when load balancing
incoming requests (see Initial Weight, above). If the load balancing policy for the
cluster is
static weight , then this column shows the Initial Weight value. If the
policy is round robin , then “ Round Robin ” is displayed instead of a value.
Processed
The total number of connections that have been processed by the server since the
system was rebooted.
Active
The total number of currently active connections to this server.